KODAK EASYSHARE DX4900 Zoom Digital Camera User's Guide

6
Chapter 1
Checking the Batteries
Check the battery power level in the Status Display before you begin taking
pictures. Don’t miss an important picture because the camera batteries are low
or exhausted.
1 Turn on the camera.
2 Check the battery symbol that appears in the
Status Display. If no symbol appears, your
battery is fully charged.
Low —batteries soon need to be
replaced or recharged.
Exhausted (blinking) —
batteries are too weak to power the camera.
Replace or recharge the batteries.
For guidelines on battery usage, see page 79.
Automatic Powerdown Saves Batteries
The automatic powerdown feature helps extend battery life by turning off the
camera when it has been inactive (no buttons pushed and no pictures taken)
for the given time period. For details on the Power Save feature, see page 43.
Automatic
Powerdown
Activated
after
Camera Behavior To reactivate
camera
Power Save off 5 minutes All camera circuits turn off.
Standard
Power Save on 1 minute
Camera in
Camera Dock
(page 58)
10
minutes
The lens cover remains
open, with the lens
retracted.
Turn the power switch
off, then back on.
Not applicable