CATALOGUE - MEDIPRO

Units / Blasting technology
Details
The blasting chamber and
air blast nozzle
The Basic quattro’s blasting
chamber is spacious and offers
great freedom of movement.
The grate at the base
of the unit allows the used
blasting material to be sucked
away by an external extraction
unit.
Using the air blast nozzle
allows objects and hands to
be cleaned whilst still within
the chamber.
Hose feed and colour
coding system
The hose feed is constructed
so that your view is not hindered.
The blasting handles are
mounted in practical holders.
Orientation is easy due to the
colour coding.
The colour coding on blasting
handles, tank selector switch,
tank lids and blasting tanks
eases orientation.
Info
Recommended for use
with the ROCATEC TM
bonding system from 3M
ESPE (see page 17).
We recommend:
High-performance
compressed air filter
• less downtime
• increased service
life
• reduced servicing
and maintenance
costs due to clean
compressed air free
of oil and water.
Page 28.
1
Units / Blasting technology
Adding the blasting
modules
The basic unit is delivered
from the factory with two
tanks (1 x 25-70 μm and
1 x 70-250 μm). One or two
blasting tanks can be subsequently
fitted according to
the grain size required.
Mounting the additional
blasting modules only takes a
few steps and requires no tools.
The Basic quattro is a compact,
multifunctional sandblasting
unit that can be used
for surface conditioning,
finishing, preparing metal
frameworks for oxidation
firing etc.
Tank selector switch,
pressure regulator and
protective grate
Individual tanks can be comfortably
selected from within
the blasting chamber. The
respective blasting pressure
can be set by the pressure regulator
situated directly above
the switch. A colour coding
system eases orientation.
An additional protective grate
to prevent premature glass
wear due to erosion is also
optionally available.
Application is very quick
and easy. When needed,
the screen is secured below
the viewport retainer with
magnets.
Order no. 2960-0003
19