CATALOGUE - MEDIPRO
CATALOGUE - MEDIPRO
CATALOGUE - MEDIPRO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Equipment / Wax technology<br />
Wax heater for modelling waxes<br />
!<br />
Save up to 50% time!<br />
The Renfert wax system:<br />
Waxlectric + Vario E +<br />
GEO Avantgarde modelling<br />
waxes see pages 34/35.<br />
3<br />
1<br />
3<br />
2<br />
6<br />
4<br />
7<br />
5<br />
Vario E<br />
The Vario E preheats mo d-<br />
elling waxes to an optimum<br />
working temperature.<br />
The Vario E saves time<br />
melting hardened wax. The<br />
selectively preheated waxes<br />
enable the flow of the wax<br />
to be precisely regulated.<br />
There are less stresses on the<br />
wax objects, which are more<br />
homogenous and much easier<br />
to carve.<br />
Technical Details<br />
1 SET or ACTUAL temperature<br />
shown on LED display<br />
in °C or °F.<br />
2 the three wells can be<br />
controlled separately. Each<br />
of the well can be switched<br />
on or off separately.<br />
3 expanded temperature<br />
interval from 45°C (113°F)<br />
to 110°C (230°F). Processing<br />
light waxes with low<br />
melting points is now also<br />
possible.<br />
4 pot design provides<br />
optimum flow of excess<br />
wax back into the well<br />
from the rim. The deep<br />
wells are also suitable for<br />
dipping copings.<br />
5 waxes are protected by lids<br />
during work breaks. The<br />
lid can be locked in place<br />
6<br />
7<br />
8<br />
at a 120°-angle to save<br />
space in the work area.<br />
glare-free view on the<br />
angled display. Control<br />
elements protected by<br />
a plastic cover for easy<br />
cleaning.<br />
Renfert recommends the<br />
special GEO Avantgarde<br />
modelling waxes (refer to<br />
page 76/77).<br />
small, compact construction.<br />
Ideal working height<br />
for relaxed modelling.<br />
Vario E also for dipping<br />
copings<br />
• deeper wax wells are suitable<br />
for dipping copings.<br />
• no need to purchase a<br />
separate wax dipping unit.<br />
• when not being used for<br />
dipping, the well in question<br />
can be switched off<br />
independently.<br />
Refer to the spare parts<br />
appendix beginning on page<br />
182 for a list of spare parts<br />
for the unit.<br />
Description Art. No.<br />
Vario E, 230 V 1452-0000<br />
Vario E, 120 V 1452-1000<br />
• a savings of 50% in modelling<br />
time in combination<br />
with Waxlectric (refer<br />
to page 36 – 39). The risk<br />
of overheating the wax is<br />
eliminated, avoiding any<br />
contraction.<br />
• short distances between<br />
Info<br />
Vario E + Waxlectric for professional<br />
and relaxed modelling<br />
the Vario E and the working<br />
model.<br />
• the technician can concentrate<br />
on his or her work<br />
without being distracted by<br />
a Bunsen burner or during<br />
the wax melting phase.<br />
Technical Details<br />
Nominal voltage 230 V, 50/60 Hz / 120 V, 50/60 Hz<br />
Power consumption 85 W<br />
Min. working temperature 45°C or 113°F<br />
Max. working temperature 110°C or 230°F<br />
Dimensions (WxHxD) 178 x 54 x 120 mm (7.01 x 2.13 x 4.73 inch)<br />
Power cord length 2 m (78.74 inch)<br />
Weight approx.<br />
660 g<br />
8<br />
40