CATALOGUE - MEDIPRO

Equipment / Model production
Details
2 The model table
• easy to move model table.
• dual guide for highest precision.
• perforations for removal of
drilling dust.
• easy to remove collection
dish for plaster dust underneath
the table.
3 The laser beam
• strong light, fine laser
point.
• easily recognised on all
plaster colours and surfaces.
• precise match to pinhole
drill.
• individual, infinitely variable
drill depth setting from
0–12 mm (0–0.47 inch) via
knurled screw.
• non-slip, even surface.
Info
For additional, useful tips
regarding pinhole drilling,
refer to the Renfert manual,
“The Master Model” at
www.renfert.com.
1
Equipment / Model production
4 The pinhole drill
• optimum access via lifting
and fixture of model table.
• tool-free drill bit replacement
via quick clamping
device.
• 3 mm drill jig, easy replaced.
• protection from plaster dust
due to efficient seal.
• engine stop function when
changing drill bit.
For information on
Renfert’s pin drills
see page 162.
5 Function
• on activating the main
switch the unit is in
STAND-BY mode.
• on depressing the table the
drill spindle is activated.
• both counter-balances on
the casing ensure easy and
relaxed drilling.
• designed for both standing
and seated (16° angle)
working positions.
• clear view of model.
53