CATALOGUE - MEDIPRO
CATALOGUE - MEDIPRO
CATALOGUE - MEDIPRO
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Equipment<br />
Soldering and melting system<br />
3<br />
4<br />
5<br />
1<br />
6<br />
2<br />
Propane gas / oxygen<br />
Complete safety-tested,<br />
ready to use solution for<br />
the dental lab.<br />
Technical Details<br />
• DIN-compliant individual<br />
components and screws.<br />
• easy to connect,<br />
ready to use.<br />
• colour coding of connections<br />
and tubes.<br />
• connection joints for gas<br />
bottles and wall connections<br />
conform to German<br />
industry standards<br />
(DIN 477).<br />
• this complete system is<br />
tested as a functioning<br />
unit and has a separate test<br />
certificate.<br />
Individual components<br />
1 handpiece No. 955-0500<br />
2 set of hoses No. 955-0100<br />
(3 m)<br />
3 pressure regulator oxygen<br />
No. 959-2000<br />
4 pressure regulator propane<br />
gas No. 959-1000<br />
5 flashback arrestor oxygen<br />
No. 959-0200<br />
6 flashback arrestor propane<br />
gas No. 959-0100<br />
Refer to the spare parts<br />
appendix beginning on page<br />
186 for a list of spare parts<br />
for the unit.<br />
Description Art. No.<br />
Complete system 955-0000<br />
propane gas /<br />
oxygen<br />
Technical Details<br />
Max. flame temperature approx. 2,750 o C (4,982 o F)<br />
Connection type Hose<br />
Propane W21,8x1/14“ LH<br />
Oxygen G 3/4“<br />
Connection pressure, external Propane: 0.5 bar (7.3 psi)<br />
Oxygen: 0.5–3 bar (7.3–43,5 psi)<br />
Weight<br />
approx. 4.3 kg<br />
Important information:<br />
• if you wish to order individual<br />
components for these<br />
systems please ensure<br />
that you order the correct<br />
components for the system<br />
you have.<br />
• should you wish to<br />
integrate any of the listed<br />
components in soldering<br />
and melting systems that<br />
don’t match the complete<br />
systems shown here, Renfert<br />
will not guarantee the<br />
compliance to regulations<br />
nor the operational safety<br />
of that system.<br />
• the gas burner systems<br />
should only be connected<br />
by qualified personnel. This<br />
is also applied to the installation<br />
of single components<br />
and replacement parts.<br />
• it is imperative to check<br />
which type of gas and oxidising<br />
agent (compressed<br />
air or oxygen) you have!<br />
• please check your local<br />
connection standards and<br />
types for compatibility!<br />
Info<br />
We recommend propane<br />
gas for melting casting<br />
alloys. Natural gas can<br />
vary in its regional burn<br />
values as well as its<br />
supply pressure. It cannot,<br />
therefore, compensate<br />
for the absorption of heat<br />
by the metal and parts of<br />
the centrifuge.<br />
68
Change language