CATALOGUE - MEDIPRO

Equipment / Wax technology
Bunsen burner with tested safety features
1
2
3
3
4
Safety burner
The use of propane or natural
gas in the lab always
represents a safety hazard.
If the Bunsen burner goes
out the gas supply must
also be immediately interrupted.
The safety burner
therefore has incorporated
automatic controls.
Technical Details
1 Thermo-electric Ignition
System
• controls the flame function.
• extinguishes the flame e.g.
in the case of a draft the
gas supply will be interrupted
within 90 seconds.
• maintenance-free safety
mechanism.
2 Ascending Pipes
• flame intensity is controlled
via two ascending pipes.
> small pipe: pilot flame.
> large pipe: main flame.
3 Flame Control
• gas supply setting via
rocking lever.
• individual control of oxygen
supply via setting wheel.
4 Stand Positions
• sturdy base for secure stand.
• easy to remove burner from
base.
• locking device in base permits
30° angle to
either side.
• ensures relaxed grip for
both right and left-handed
users.
• low burner height of 13 cm.
The safety burner is
approved by the DVGW.
Renfert recommendation:
Wax instruments
on page 85 – 89.
Refer to the spare parts appendix
beginning on page 183 for
a list of spare parts for the unit.
3
Caution:
Propane gas Bunsen burners
should only be used in
conjunction with a pressure
reducer set to 50 mbar!
(Art. No. 959-1000)
When ordering please
give type of gas used!
German standard
4
Description Art. No.
Propane gas (F) 933-0100
Natural gas E 932-0100
Natural gas LL 932-0101
Flexible tubing 931-0000
for burners
Technical Details 933-0100 932-0100 932-0101
Connecting pressure 50 mbar 20 mbar 20 mbar
Consumption 48 g/h 63 l/h 72 l/h
Power
660 W
Connecting hose meets DIN 30664
Dimensions (BxHxD) 160 x 130 x 60 mm (3.94 x 5.12 x 2.36 inch)
Weight
approx. 640 g (incl. burner base)
44