You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting to a DVD Player<br />
If you want to connect a DVD player to your LCD <strong>TV</strong>, you can use connectors on the <strong>TV</strong> set. DVD<br />
players may have different connectors. Please refer to your DVD player’s instruction book for<br />
additional information. Power off both the <strong>TV</strong> and the device before making any connections.<br />
Note: Cables shown in the illustration are not supplied.<br />
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD<br />
player as illustrated below, switch to HDMI source. See, “Input Selection” section.<br />
• Most DVD players are connected through SCART sockets. Use a scart cable to connect as<br />
shown below.<br />
• You may also connected through COMPONENT sockets. Use a component video cable to connect<br />
video input. For enabling audio, use a component audio cable as illustrated below. When done,<br />
switch to YPbPr source. See, “Input selection” section.<br />
Note : These three methods of connection perform the same function but in different levels of quality. It is not<br />
necessary to connect by all three methods.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
REAR VIEW<br />
English - 14 -<br />
A01-[GB]-MB35_ID<strong>TV</strong>-PANEU_BRONZE3_26856W_1050UK_10059700_50140542.indd 14 09.01.2009 19:17:52
Change language