Kalzip® Systems

Dimensioning tables
7.3.2 Purlin roof (multi-span sheets) with composite clips
Clip fixing on steel purlins or steel spacer construction 1.5 mm:
2 fastener systems per clip, screw diameter 5.5 mm or SFS SDK.
Line Kalzip
type
Sheet thickness
t in mm
Pressing loads*
kN/m 2
Uplifting loads
kN/m 2
0.75 1.00 1.25 0.90 1.44 1.60 1.98 2.56 3.52
1 65/333 0.80 2.50 2.40 2.00 2.20 2.00 1.65 1.45 1.10 0.80
2 65/305 0.90 3.15 2.70 2.20 2.80 2.50 2.00 2.00 1.50 1.15
3 1.00 3.65 2.70 2.20 3.15 2.80 2.50 2.00 1.55 1.45
4 1.20 3.60 2.70 2.20 3.30 2.80 2.50 2.15 1.55 1.45
5
6 65/400 0.80 2.50 2.30 1.85 2.00 1.70 1.50 1.20 0.95 0.70
7 0.90 2.95 2.30 1.85 2.60 2.30 1.70 1.70 1.30 0.95
8 1.00 3.00 2.30 1.85 3.00 2.35 2.10 1.70 1.30 0.95
9 1.20 3.00 2.30 1.85 3.15 2.35 2.10 1.70 1.30 0.95
10
11 50/333 0.80 2.10 1.90 1.80 2.20 1.75 1.55 1.25 0.95 0.70
12 0.90 2.60 2.00 2.00 2.80 2.40 2.00 1.80 1.40 1.00
13 1.00 2.80 2.20 2.00 3.15 2.80 2.50 2.00 1.55 1.15
14 1.20 3.00 2.30 2.00 3.30 2.80 2.50 2.05 1.55 1.15
15
16 50/429 0.80 2.00 1.80 1.70 1.80 1.35 1.20 0.95 0.75 0.55
17 0.90 2.45 1.90 1.70 2.40 1.95 1.70 1.40 1.10 0.80
18 1.00 2.70 2.10 1.70 2.75 2.15 1.95 1.55 1.20 0.85
19 1.20 2.80 2.15 1.70 2.90 2.15 1.95 1.55 1.20 0.85
20
21 NatureRoof 0.80 1.80 1.55 1.35 2.20 2.00 1.65 1.45 1.10 0.80
22 65/333 0.90 1.80 1.55 1.35 2.80 2.50 1.80 2.00 1.55 1.15
23 1.00 1.80 1.55 1.35 3.15 2.80 2.50 2.00 1.55 1.15
24 1.20 1.80 1.55 1.35 3.35 2.80 2.50 2.15 1.55 1.15
Supporting width in [m]
*The supporting widths for snow load also apply to the wind suction load in the normal range for building heights 100 m.
Kalzip 49