Compatible Control - HUBER
Compatible Control - HUBER
Compatible Control - HUBER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Displays,<br />
<strong>Control</strong><br />
panel<br />
Connections<br />
Activity<br />
incidator<br />
LEDs<br />
2. Device Description<br />
2.2 <strong>Control</strong>ler<br />
<strong>Compatible</strong> <strong>Control</strong> CC1<br />
<strong>Compatible</strong> <strong>Control</strong> CC2<br />
<strong>Compatible</strong> <strong>Control</strong> CC3<br />
R1 Digital status display<br />
R2<br />
Prompt for a temperature setpoint,<br />
input confirmation (data<br />
transfer)<br />
R3 Call of the user menu for convenient<br />
handling<br />
R4 On/Off key to start/stop thermoregulation<br />
R5 Activity indicator LEDs<br />
R6 Over-temperature protection<br />
device<br />
R7 Encoder/ rotate:<br />
Entry of program numbers,<br />
step numbers, parameters<br />
(e.g. temperature set-point)<br />
Encoder/ press:<br />
Input confirmation (data transfer)<br />
R8 Pt100 sensor socket<br />
R9 RS 232/485 interface<br />
R10<br />
R51<br />
R52<br />
R53<br />
R54<br />
Fixing screw (on either side)<br />
for connecting the <strong>Compatible</strong><br />
<strong>Control</strong> to the thermostat<br />
Process temperature control active (green<br />
LED), only with CC2, CC3: Temperature is<br />
measured by a process sensor located at the<br />
point of control e.g. in a reactor.<br />
Heating active (yellow LED)<br />
Cooling/compressor active (blue LED)<br />
Pump active (green LED):<br />
Thermal fluid is being pumped through the<br />
connected application, e.g. around the reactor<br />
jacket.<br />
12<br />
R1<br />
R2<br />
R5<br />
R6<br />
R1<br />
R3<br />
R2<br />
R5<br />
R6<br />
R1<br />
R4<br />
R3<br />
R2<br />
R5<br />
R6<br />
R10<br />
R51<br />
R52<br />
R53<br />
R54<br />
R7<br />
R8<br />
R7<br />
R10<br />
R8<br />
R9<br />
R7<br />
R10