Compatible Control - HUBER

Factory
Default
Language
Temperature
Scale
Control
Mode
4. Thermoregulation
via Controller
4.3 Editing Default Settings
1. Restoring the factory default
2. Selecting a language for the controller display
3. Temperature scale
4. Control mode – internal, process (cascade)
All the factory defaults can be customized in the menu.
All the factory defaults can be restored via the „Factory Default“
option (with the thermoregulation function switched off). For this purpose,
proceed as described below. (Also refer to „Salutation“ 4.1).
MAIN MENU:
Config User
I-> Factory default
Time scale
INITIALISE:
I->Unit Data
Programmer
User menus
All together
Exit
INITIALISE:
User menus
I->All together
Exit
MAIN MENU:
Set-point limits
I->Language
Temperature Scale
Language:
I->Deutsch
English
Francais
MAIN MENU:
Language
I->Temperature Scale
Temperiermodus
Temperature Scale:
I->Celsius
Fahrenheit
Kelvin
MAIN MENU:
Temperature Scale:
I->Control mode
Umwälzen
Control mode:
I->Internal
Process (Cascade)
„Factory Default“ option
Submenu selection:
„Unit Data“: Important if you replaced device
components or accessories.
„Programmer“
Deletion of all the thermoregulation programs
incl. ramps entered by the customer.
„User menus“
Restores the „User menu“ factory default.
„All together“
Restores all the factory defaults.
Caution! All the thermoregulation programs
incl. ramps entered by the customer will be
deleted!
„Exit“ option:
The factory defaults will not be restored.
For selecting the language that is to be displayed
on the controller.
For selecting the temperature unit for display
on the controller.
Not available for Compatible Control CC1!
For selecting the control mode, either Internal
or Process (Cascade).
For definitions of internal and external thermoregulation, please refer
to Appendix 6.3. Huber Glossary, keyword Control Mode – Internal,
Process (Cascade)!
34