Compatible Control - HUBER

Salutation
Flash
displays
on the
controller
Operating
the
controller
Messages
4. Thermoregulation
via Controller
4.1 Safety Instructions
and Principles
Manufac-
turer
Salutation
System
Test
Status
display
Principles of displays and entries
The status display depends on the preset display mode (refer to 6.1).
Select the
Main Menu
Electronics test
Memory Test
Pump Test
CC 505
3 04.00a
Name of thermostat,
Software version
Internal
Process
or or
Select The display will
a menu change upon turning
option of the encoder Confirm
your entry1) 1) If you fail to confirm your entry within 4 minutes, your selection will
not be saved. The program returns to the status display.
To exit the menu instantaneously at any point, use the Break function:
Press the SET and MENU keys simultaneously. Your selection will not
be saved.
During operation, ad-hoc messages may be displayed on the controller.
They provide information on irregularities and hazards in the thermostat.
In the case of imminent danger, the controller will display a message
and stop the thermoregulation process/switch off the thermostat at
the same time (see 6.3).
On/Off Press the On/Off key to start/stop the thermoregulation process
(thermoregulation combined with circulation).
Alternative:
MasterClear function: Pressing the MENU and TEMP keys simultaneously
stops a thermoregulation program in progress and switches off
the analog interface or switches from the digital interface.
Note:
To learn more about the menu and the individual menu options, please
also read sections 4.2 to 4.6 of the operating manual. The default
settings can be found in Appendix 6.1 of the manual. All messages with
expalnations of how to deal with the problems can also be found in
the Appendix 6.2 of the manual. Definitions are in Appendix 6.4 of the
manual.
* Applies to Compatible Control CC2 and CC3 only
** Applies to Compatible Control CC3 only
32
CC 505
-50.0 200.0
Name of thermostat,
Working temperature range
Internal 17.5 C
Process
n.a.
Setpoint
20.0 C
Stored
or
Denied
Flash display,
return to the
status display