Manual pCoOEM Bicircuit - Rhoss

Summary / Contents
1 Introduction 6
2 Inlet outlet list 7
2.1 Digital outlets 7
2.2 Analogic outlets 7
2.3 Digital inlets 7
2.4 Analogic inlets 7
2.5 Considerations 8
2.6 Inlets configurations and digital outlets 8
2.7 B4 multyfunction analogic enter 8
3 On – Off and Unit state 10
3.1 On - Off 10
3.1.1 Used inlets 10
3.1.2 Used parameters 10
3.1.3 Working descriptions 10
3.2 Unit state 10
4 Main circulation pump management 11
4.1 On/Off Main/s pump/s 11
4.1.1 Used parameters 11
4.1.2 Used outlets 11
4.1.3 Working description 11
4.2 Working forcing of the main circulation pump 12
4.3 Second pump management 13
4.4 Pump/s management in case of water flow alarm 13
4.4.1 Used inlets 13
4.4.2 Used parameters 13
4.4.3 Used outlets 13
4.4.4 Working description with single pump 13
4.4.5 Working description with double pump 13
5 Thermoregolation 15
5.1 Summer/winter commutation 15
5.1.1 Used inlets 15
5.1.2 Used parameters 15
5.1.3 Used outlets 15
5.1.4 Working description 15
5.2 Setpoint set up 16
5.2.1 Used parameters 16
5.2.2 Working description 16
Rhoss S.p.A. S.A.T.
Rev. 1.0 20/01/05 2