Vlado cherokee j8s.pdf - VWClub.BG

More documents

Recommendations

Info

ENGINE AND PERIPHERALS Specifications 10 Rings Three rings (thickness in mm) Normally aspirated engine FITTING THE RINGS Rings set to their original adjustment must be free within their channels. Ensure the fitting direction is observed. – Compression – Sealing – Scraper Turbo engine – Compression – Sealing – Scraper Gudgeon pin (in mm) – Length: – External diameter: – Internal diameter: 2 2 2 2.5 2.5 4 (tapered) (rounded) (trapezoidal) (trapezoidal) (rounded) 75 28 16 86187R Fit the rings so that the gaps are equally spaced around the piston. 72552R Downloaded from www.Manualslib.com manuals search engine 10-26
ENGINE AND PERIPHERALS Specifications 10 CON RODS in mm Lateral play in the big end 0.31 to 0.57 Refitting and assembling con rods and pistons Direction of fitting: rotochamber on the injector side or the side opposite the oil filter. Centre-to-centre distance between big end and small end 155 ± 0.035 Check that the gudgeon pins rotate properly in the new piston and the con rod. Big end diameter 60 Small end diameter ● without ring 30 ● with ring 28 + 0.019 - 0.005 + 0.021 0 + 0.01 + 0.003 Oil the gudgeon pin. Ensure that the piston and con rod are fitted the right way around (follow the arrows): Engines 852 J8S all types except turbo The small end has a bush. N.B.: the small end bushes cannot be replaced or redrilled. WARNING: do not use a sharp point to mark the bearing caps in relation to their con rods as this could start a crack in the rods. Use an indelible marker pen. Normally aspirated engine The big end and the half bearing are pierced to allow an oil jet to pass through. Turbo engine Turbo engine The con rods do not have a hole for an oil jet. The upper and lower bearing shells are not pierced. Downloaded from www.Manualslib.com manuals search engine 10-27
Page 1 and 2: Workshop repair manual ENGINE (Dies
Page 3 and 4: ENGINE AND PERIPHERALS 110 10 Forew
Page 5 and 6: ENGINE AND PERIPHERALS Diagram 10 J
Page 7 and 8: ENGINE AND PERIPHERALS Engine ident
Page 9 and 10: ENGINE AND PERIPHERALS 10 Tightenin
Page 11 and 12: ENGINE AND PERIPHERALS Tightening t
Page 17 and 18: ENGINE AND PERIPHERALS Lubrication
Page 19 and 20: ENGINE AND PERIPHERALS Specificatio
Page 27: ENGINE AND PERIPHERALS Specificatio
Page 41 and 42: ENGINE AND PERIPHERALS 10 Essential
Page 43 and 44: ENGINE AND PERIPHERALS Essential sp
Page 45 and 46: ENGINE AND PERIPHERALS Essential sp
Page 47 and 48: ENGINE AND PERIPHERALS 10 Cylinder
Page 49 and 50: ENGINE AND PERIPHERALS Overhauling
Page 79 and 80:
ENGINE AND PERIPHERALS Overhauling
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119:
show all

Vlado cherokee j8s.pdf - VWClub.BG

Create successful ePaper yourself

Delete template?

Save as template?