Vlado cherokee j8s.pdf - VWClub.BG
Vlado cherokee j8s.pdf - VWClub.BG
Vlado cherokee j8s.pdf - VWClub.BG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGINE AND PERIPHERALS<br />
Overhauling the engine 10<br />
The rocker arm shaft is oriented using a full dog point<br />
screw.<br />
The shaft bearing greasing holes are directed towards<br />
the camshaft (the oil passes through the rocker arm<br />
shaft bearings).<br />
Refitting<br />
Place the bearing (E) on the shaft and fix it so that the<br />
greasing holes point towards the bearing plate.<br />
Then fit:<br />
– a rocker arm,<br />
– a spring,<br />
– another rocker arm,<br />
– an intermediate bearing, offset (F) pointing to the<br />
flywheel.<br />
Continue refitting in the same order, fit the cap with a<br />
new oil filter and tighten to a torque of 2 daNm.<br />
This torque has to be respected as the rocker arm<br />
shaft is only kept rotating by the full dog point screw on<br />
the bearing (E).<br />
Rocker arms<br />
The inlet and exhaust rocker arms are identical and<br />
both have an oil way to lubricate the cams on the<br />
camshaft.<br />
REBUILDING THE CYLINDER HEAD<br />
Fit new valves, grind them gently into their respective<br />
seats. Clean all the parts thoroughly, mark them for<br />
identification purposes, then carry out the refitting<br />
operation.<br />
Oil all the parts.<br />
16526R<br />
Downloaded from www.Manualslib.com manuals search engine<br />
10-57