Vlado cherokee j8s.pdf - VWClub.BG
Vlado cherokee j8s.pdf - VWClub.BG
Vlado cherokee j8s.pdf - VWClub.BG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGINE AND PERIPHERALS<br />
Overhauling the engine 10<br />
Before fitting the cylinder liners-pistons-con rods<br />
assemblies in the cylinder blocks, don't forget to<br />
place an O-ring on each cylinder liner, making sure<br />
that it is not twisted, as well as a shaft seal..<br />
Fit the cylinder liner retaining flange Mot. 521-01 and<br />
tighten the bolts and mounting nuts to 5 daNm.<br />
Fit the cylinder liners-pistons-con rods assemblies<br />
in the cylinder block, making sure they are in the right<br />
positions.<br />
The cylinder liner flat surfaces need to be parallel.<br />
The piston combustion cut-out should be pointing<br />
towards the relay shaft side.<br />
If the con rod is pierced, point the oil jet towards the<br />
end opposite the relay shaft.<br />
16558R<br />
Fit the con rods onto the oiled big end journals of the<br />
crankshaft.<br />
Downloaded from www.Manualslib.com manuals search engine<br />
10-87
Change language