Vlado cherokee j8s.pdf - VWClub.BG
Vlado cherokee j8s.pdf - VWClub.BG
Vlado cherokee j8s.pdf - VWClub.BG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGINE AND PERIPHERALS<br />
Specifications 10<br />
FITTING THE ENGINE TO SUPPORT Mot. 792-03<br />
AND THE THREE RODS A, B AND C<br />
Engines of all types<br />
Remove the intake and exhaust manifolds,<br />
The rods (A), (B) and (C) are mounted on the cylinder<br />
block so that they fit into the holes (1, 8, 17) on the<br />
plate.<br />
90749R1<br />
SAFETY PRECAUTIONS WHEN STOPPING THE<br />
ENGINE<br />
Let the engine run at idle speed for 30 seconds<br />
and then switch off the ignition.<br />
SAFETY PRECAUTIONS<br />
Turbocharger engine<br />
Do not rev the engine to avoid starting the<br />
turbocharger. If this occurs, the turbo may run by<br />
inertia without lubrication when the ignition is switched<br />
off and there is a risk that the turbine shaft will grate.<br />
After performing an operation on the engine that<br />
involves disconnecting the oil gallery, it is essential to<br />
reprime the turbocharger oil circuit, ensuring that the<br />
following conditions are respected:<br />
– connect the oil return and attach it using a new bolted<br />
clamp,<br />
– fill up the turbo with engine oil through the inlet<br />
opening (A),<br />
– run the starter motor to reprime the turbocharger oil<br />
circuit, until the oil begins to escape from the<br />
turbocharger inlet opening,<br />
– reconnect the turbocharger inlet pipe,<br />
– run the engine at idle speed so that the circulation of<br />
oil in the turbocharger is reestablished.<br />
Downloaded from www.Manualslib.com manuals search engine<br />
10-36