Tender Document Volume - 2 - BPDB
Tender Document Volume - 2 - BPDB
Tender Document Volume - 2 - BPDB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.18 Spare Parts<br />
Spares during Warrantee period<br />
The Contractor shall submit a list of Essential spare parts with OEM Part No. and<br />
consumables to be necessary for maintenance of the unit(s) and other plant<br />
equipment inclusive of emergency use that takes place in the course of operation<br />
(according to the Manufacture's recommendation and guideline) during the<br />
Warranty period (24 months). During the warranty period of 24 months, the<br />
Contractor shall supply all necessary equipment, spare parts,<br />
materials/consumables etc. at his own cost and whether it is listed or not in their<br />
list.<br />
Spares during Long Term Service agreement (LTSA)<br />
The <strong>Tender</strong>er shall, in addition to essential spare parts and consumables for<br />
warrantee period also submit a list of spares for LTSA period (next 4 years after<br />
warrantee period) which reflects the OEM's guidelines and <strong>Tender</strong>er's experience<br />
in the operation and maintenance of the type of equipment proposed. For LTSA<br />
period also the Contractor shall supply all necessary equipment, spare parts,<br />
materials/consumables<br />
2.19 Special Maintenance Tools<br />
The contractor shall provide all special tools including a boroscope set required for<br />
maintenance of the unit and hand them over in good condition to the BOARD. A<br />
list of all such tools shall be incorporated with tender. Contractor shall not be<br />
permitted to use any equipment/ machinery/ tools, which are to be supplied<br />
under the Contract.<br />
2.20 Office equipment<br />
The Contractor shall provide 3(three) Nos of Computer (latest model), each with<br />
Laser Printer, UPS (30 Minutes at full load, Min.), Stabiliser, Standard Tables &<br />
Chairs etc.<br />
2.21 Electrical workshop tools<br />
Current injection test set, Megger, Multimeter, etc.<br />
2.22 Machine Shop equipment & Tools - Deleted<br />
Lathe, Piller drill, Universal miller, Machine hacksaw, Grinding Machine,<br />
Small universal machine tools, Welding set etc.<br />
Ghorasal 200 MW to 300 MW Gas Turbine Peaking Power Plant Project (Vol-2 of 3)<br />
18