5000 Series Indicators Instruction Manual - MaRCo
5000 Series Indicators Instruction Manual - MaRCo
5000 Series Indicators Instruction Manual - MaRCo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN-36<br />
<strong>5000</strong> <strong>Series</strong> <strong>Indicators</strong><br />
3.9.5 Layout Sub-menu<br />
This sub-menu is used to define format of data output to a printer or computer.<br />
Format<br />
Set the printing format.<br />
MULtI = a multi-line (single column style) printout is generated. A CRLF is added after each<br />
item.<br />
SINGLE = a single line printout is generated. (A TAB space is added between each item and a<br />
CLRF is used only after the very last item.)<br />
Line Feed<br />
Set the paper feed.<br />
Settings:<br />
LINE = move paper up one line after printing<br />
4.LINE = move paper up four lines after printing<br />
FOrM = a form feed is appended to the printout<br />
3.9. List Menu Settings<br />
Print the menu settings.<br />
NO = do not print.<br />
YES = print.<br />
3.9. End Print<br />
Advance to the next menu.<br />
3.10 COM 1 and COM 2 Menus<br />
The table shows the items in the communication menus. Default settings are bold.<br />
Enter the menu to define communication parameters.<br />
NOTE: The COM2 menu is only displayed if a<br />
second interface (RS232 or RS422/RS485) is<br />
installed.<br />
Reset: No, Yes<br />
Baud Rate: 300, 600, 1200, 2400, 4800, 9600, 19200<br />
Parity: 7 Even, 7 Odd, 7 None, 8 None<br />
Handshake: Off, XON/XOFF, Hardware<br />
Address: Off, 01,…, 99<br />
Alt Command: Print (-> Off, A … P … Z), Tare (-> Off, A … T … Z),<br />
Zero (-> Off, A … Z)<br />
End Com1 Exit COM1 menu<br />
(End Com2) Exit COM2 menu<br />
3.10.1 Reset<br />
Set the COM1 and COM2 menu to factory defaults.<br />
NO = not reset.<br />
YES = reset.
Change language