5000 Series Indicators Instruction Manual - MaRCo
5000 Series Indicators Instruction Manual - MaRCo
5000 Series Indicators Instruction Manual - MaRCo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN-46<br />
<strong>5000</strong> <strong>Series</strong> <strong>Indicators</strong><br />
Establishing the Average Piece Weight (APW) (Cont.)<br />
The display shows the sample size Put10Pcs.<br />
Establishing a New APW<br />
Press the No button to increment the sample size. Choices are 5, 10, 20, 50 and 100.<br />
To establish the APW, place the specified quantity of samples on the scale and press the FUNCTION button to<br />
capture the weight.<br />
APW is displayed shortly followed by the APW value with the current unit of measure.<br />
Begin Counting<br />
Place the parts on the scale and read the count. If a container is used, be sure to tare the empty container<br />
first.<br />
<br />
4.8. Percent Weighing<br />
Use this mode to measure the weight of a sample as a percentage of a reference weight.<br />
Reference Weight (Ref Wt)<br />
When the Mode button is released, CLr.rEF% is displayed.<br />
Clearing a Stored Reference Weight<br />
Press the Yes button to clear the stored reference weight.<br />
Recalling a Stored Reference Weight<br />
Press the No button to recall the existing reference weight.<br />
NOTE: Press the FUNCTION button to temporarily display the reference weight.<br />
Establishing a New Reference Weight<br />
The display shows Put.rEF %.<br />
To establish the Ref Wt, place the sample on the scale and press the FUNCTION button to capture the weight.<br />
rEF.Wt is displayed shortly followed by the REF Wt value with the current unit of measure.<br />
Begin Percent Weighing<br />
Place the sample on the scale, and read the percent value. If a container is used, be sure to tare the empty<br />
container first.
Change language