5.5 initial diagnostic check: efi - harley-davidson-sweden.se
5.5 initial diagnostic check: efi - harley-davidson-sweden.se
5.5 initial diagnostic check: efi - harley-davidson-sweden.se
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HOME<br />
Speedometer Self Diagnostics (chart)<br />
1<br />
While holding odometer re<strong>se</strong>t switch in,<br />
turn ignition switch to IGN. Make sure<br />
Run/Stop switch is in RUN position.<br />
Relea<strong>se</strong> re<strong>se</strong>t switch.<br />
Does “diag” appear?<br />
YES<br />
NO<br />
”P” flashing.<br />
To display DTCs for the<br />
ECM, press and hold<br />
re<strong>se</strong>t switch for more<br />
than 5 <strong>se</strong>conds.<br />
See 2.2 INITIAL DIAGNOSTIC<br />
CHECK: SPEEDOMETER.<br />
To choo<strong>se</strong> TSM/<br />
TSSM, press and<br />
relea<strong>se</strong> re<strong>se</strong>t switch.<br />
”S” flashing.<br />
To display DTCs for<br />
TSM/TSSM, press and<br />
hold re<strong>se</strong>t switch for<br />
more than 5 <strong>se</strong>conds.<br />
To choo<strong>se</strong> Speedometer,<br />
press and relea<strong>se</strong> re<strong>se</strong>t<br />
switch.<br />
Device<br />
respon<strong>se</strong>?<br />
NO<br />
”SP” flashing.<br />
To choo<strong>se</strong> Tachometer,<br />
press and relea<strong>se</strong> re<strong>se</strong>t<br />
switch.<br />
To display DTCs for<br />
speedometer, press and<br />
hold re<strong>se</strong>t switch for more<br />
than 5 <strong>se</strong>conds.<br />
YES<br />
“none” displayed.<br />
2<br />
DTC<br />
displayed.<br />
“no rsp” displayed.*<br />
Tachometer malfunction.<br />
See 2.4 SPEEDOMETER/<br />
TACHOMETER.<br />
* Models not equipped<br />
with a tachometer will<br />
display “no rsp” normally.<br />
”T” flashing.<br />
To display DTCs for<br />
tachometer, press and<br />
hold re<strong>se</strong>t switch for more<br />
than 5 <strong>se</strong>conds.<br />
Press and relea<strong>se</strong><br />
re<strong>se</strong>t switch. Part number<br />
of module will be<br />
displayed.<br />
Press and relea<strong>se</strong><br />
re<strong>se</strong>t switch.<br />
Are more DTCs<br />
displayed?<br />
NO<br />
To choo<strong>se</strong> ECM, press<br />
and relea<strong>se</strong> re<strong>se</strong>t switch.<br />
YES<br />
“end” displayed.<br />
To clear all DTCs for<br />
<strong>se</strong>lected module hold re<strong>se</strong>t<br />
switch for more than 5 <strong>se</strong>conds.<br />
If DTCs are not to be<br />
cleared, Press and relea<strong>se</strong><br />
re<strong>se</strong>t switch. Part number of<br />
module will be displayed.<br />
Press and relea<strong>se</strong> re<strong>se</strong>t<br />
switch again to continue to<br />
next module.<br />
Figure 5-9. Speedometer Self Diagnostics<br />
5-18 2004 Touring: Engine Management (EFI)
Change language