Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cylinder Head Accessories<br />
Automatic Compression Release<br />
Save your starter and battery from the unneeded<br />
wear and tear caused <strong>by</strong> big inch motors. These<br />
handy devices are used in conjunction with 2-plug<br />
heads and are a breeze to use. Install one in each<br />
of the right side plug holes, push down the blue<br />
cap and hit the starter. Your bike will start as if<br />
it were easier than stock and when it does<br />
start, the compression release valves will close<br />
automatically. This makes your high compression<br />
motor streetable or enables your motor to start<br />
with a weak battery. Sold in pairs.<br />
010186 14mm thread, 3/4" reach . . . . . . .$189.99<br />
36178<br />
36144<br />
Colony Cylinder Base Nuts<br />
Early-Style ‘Acorn’ Base Nuts<br />
36144 Fits 1936-early 1977 Big Twins . . . .$16.99<br />
Late-Style<br />
9/16" hex size permits use of a box wrench.<br />
36178 Fits late 1977 thru 1984<br />
Shovelhead models . . . . . . . . . . . . . .$22.99<br />
75400<br />
<strong>Engine</strong><br />
9<br />
59655<br />
Replacement Head Bolts<br />
Head bolts for Twin Cam 88 ® and Evolution Big<br />
Twin and Sportster ® models from late 1985 to<br />
present. Sold each.<br />
59655 Zinc-plated outer<br />
(repl. OEM 16480-92) . . . . . . . . . . . . .$4.99<br />
59657 Chrome-plated outer . . . . . . . . . . . . .$4.99<br />
75400 Zinc-plated inner<br />
(repl. OEM 16478-85A) . . . . . . . . . . . .$4.99<br />
75401 Set of eight: four each CC #59655,<br />
four each CC #75400 . . . . . . . . . . . .$27.49<br />
Shovelhead Big Bore<br />
Head Bolt Kit<br />
Twelve-point, grade 8 head bolts with machined<br />
heads and washers to clear big-bore barrels. Will<br />
also work on stock barrels.<br />
36192 Black oxide . . . . . . . . . . . . . . . . . . . . .$37.99<br />
36277 Chrome . . . . . . . . . . . . . . . . . . . . . . . .$45.49<br />
36196<br />
36194<br />
Kibblewhite Cylinder Studs<br />
for Evolution ® Models<br />
Completely-ground outside-diameter,<br />
black oxide coated, and rolled threads.<br />
Sets of 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99<br />
55135 Fits Evolution ® Big Twin models<br />
from 1984 thru 1999<br />
55136 Fits Evolution ® Sportster ® models<br />
from 1986 thru 2003<br />
36143 36142<br />
Colony Cylinder Base Nuts<br />
Sets of high-torque cylinder base nuts for all big<br />
bore or stock 74" and 80" cylinders.<br />
36142 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$25.69<br />
36143 Black oxide . . . . . . . . . . . . . . . . . . . . . .$25.99<br />
Colony Cylinder<br />
Hardware<br />
Stud sets feature heattreated,<br />
interferencefit<br />
threaded studs.<br />
Cylinder reinforcement<br />
washers are available<br />
in chrome-plated or<br />
black oxide finishes.<br />
36053<br />
Cylinder Base Stud Sets<br />
Sold in sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.04<br />
36193 Fits Big Twins from 1930 thru 1977<br />
(repl. OEM 16831-30)<br />
36194 Fits Shovelheads from 1978 thru 1984<br />
(repl. OEM 16837-78)<br />
Cylinder Base Washer Sets<br />
Fits Big Twin models 1978 thru 1984.<br />
36196 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$21.49<br />
36197 Black oxide (repl. OEM 16836-78) $15.49<br />
Cylinder Stud Sets for Evolution ® <strong>Engine</strong>s<br />
Sold in sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99<br />
36053 Fits Evolution ® Big Twin models from late<br />
1985 thru 1999 (repl. OEM 16837-85C)<br />
36107 Fits Evolution ® Sportster ® models late<br />
1986 thru 2003 (repl. OEM 16832-87A)<br />
Ram Jett Heavy-Duty<br />
Cylinder Stud Kit<br />
Prevent head and base gasket leakage in stock<br />
and high-performance applications. Constructed<br />
from heat-treated chromemoly with rolled<br />
threads. Inserts are made from a malleable steel<br />
alloy. Each kit includes eight studs, eight inserts,<br />
a specially-sized cutting tool, a specially-sized<br />
tap and a tap guide. They’ll also accommodate<br />
stroker cylinders up to .250"-taller-than-stock,<br />
and the studs are available separately for use on<br />
Original Equipment or aftermarket cases. Includes<br />
instructions for in-the-frame installation.<br />
15042 Complete kit for Evolution ® Big Twin<br />
models late 1985 thru 1999 . . . . .$218.99<br />
15043 Cylinder studs ONLY (set of 8) . . . .$79.99<br />
15044 Stud inserts ONLY (set of 8) . . . . . .$15.49<br />
9.32<br />
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Change language