You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Valve Spring Kits & Components<br />
24294<br />
24295<br />
24296<br />
<strong>Engine</strong><br />
9<br />
Andrews Valve Parts for<br />
Twin Cam 88 ® , Evolution ®<br />
and Shovelhead Motors<br />
When installing performance cams, total spring<br />
assembly height should be checked before<br />
operation. The valve spring collars and springs<br />
offered here provide correct total spring<br />
assembly height without complicated machining<br />
on the heads themselves.<br />
Titanium Upper Spring Collars<br />
Fits Twin Cam 88 ® and Evolution ® Big Twin and<br />
Sportster ® motors. Stronger than Original<br />
Equip-ment with .050" more travel and a weight<br />
savings of 50%. Use stock keepers. . . . . . . .$64.99<br />
24199 Set of 4<br />
High Lift Spring Set<br />
Fits Twin Cam 88 ® and Evolution ® Big Twin and<br />
Sportster ® motors. When used with the titanium<br />
upper collars listed above, cam lifts of over .550"<br />
can be achieved. Installation does not require<br />
machining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99<br />
24198 Set of 4<br />
High Lift Spring Set for Shovelheads<br />
For 74" and 80" motors. Provide the correct<br />
spring pressure for Andrews Shovelhead<br />
cams. Installation doesn’t require<br />
complicated machining. . . . . . . . . . . . . . . . . . .$32.99<br />
24294 Set of 4<br />
High Lift Upper Collars for Shovelheads<br />
When used with high-lift springs, these<br />
collars for 74" and 80" motors can<br />
accommodate cams of up to .600" lift. Made<br />
from T6 aluminum. . . . . . . . . . . . . . . . . . . . . . .$32.99<br />
24297 Set of 4<br />
Medium Lift Upper Spring Collars<br />
for Shovelheads<br />
For 74" and 80" motors and designed to add<br />
.060" spring travel to stock springs without<br />
other modifications. Simplify the installation of<br />
Andrews ‘B’ or ‘#2’ cams in stock Shovelhead<br />
motors. Heat-treated steel. . . . . . . . . . . . . . .$32.99<br />
24295 Set of 4<br />
Low Profile Lower Spring Collars<br />
for Shovelheads<br />
Low-profile lower spring collars for 74" and 80"<br />
motors. Similar to 1980-up OEM collars, but low<br />
profile for easier installation of high lift cams.<br />
Required if using 1980 or later style valve guides<br />
which use seals like CC #24347. Made from<br />
heat-treated steel. . . . . . . . . . . . . . . . . . . . . . . .$32.99<br />
24296 Set of 4<br />
S&S Valve Spring Kit<br />
Triple valve spring kit is designed for use with<br />
stock shoulderless guides and valves with 5/16"-<br />
diameter stems. It will accommodate cams with<br />
lifts up to .640", and includes steel top collars<br />
that have been drilled for lightness and to<br />
increase cooling. Spring seat pressure is 170 lbs.<br />
at the stock 1.800" installed height. . . . . .$109.99<br />
45846 Fits Evolution ® Big Twin and Sportster ®<br />
engines from 1984 thru 2003 and<br />
Twin Cam 88 ® engines from 1999<br />
to present<br />
Kibblewhite Lightweight<br />
Racing Valve Spring Kits<br />
Matched Kibblewhite top-quality components<br />
improve valve train performance – especially<br />
important with high-lift cams. Kits include:<br />
• Four retainers (choice of heat-treated steel,<br />
aluminum, or titanium)<br />
• Four 15° machined pairs of heat treated<br />
steel keepers<br />
• Four double racing valve springs with lower<br />
spring collars<br />
• Installation instructions<br />
55217 High lift kit (up to .600") for all<br />
88 ® models, and Evolution ® Big Twin<br />
and Sportster ® models.<br />
170 lb. to 180 lb. seat pressure.<br />
Features titanium retainers . . . . .$159.99<br />
55130 For all Twin Cam 88 ® model, and Evolution<br />
® Big Twin and Sportster ® models.<br />
160 lb. to 180 lb. seat pressure, up to<br />
.550" lift at valve. Features 7075-T6 hard<br />
anodized aluminum retainers . . . .$99.99<br />
55133 For all Sportster ® models from 1970<br />
thru 1985. 160 lb. seat pressure,<br />
up to .460" lift at valve . . . . . . . . .$109.99<br />
55134 For all 74" and 80" Big Twins from 1948<br />
thru 1984. 160 lb. seat pressure, up to<br />
.520" lift at valve . . . . . . . . . . . . . . . .$84.99<br />
Manley Valve Spring Lift Kits<br />
Increase the amount of valve travel without<br />
binding for use with high-performance<br />
camshafts with higher-than-stock lift. Kits are<br />
packaged with reverse wound springs to reduce<br />
harmonics and control spring surge. Most kits<br />
are available with titanium collars for ultimate<br />
performance, or with steel collars as a lower cost<br />
alternative. Kits requiring special machining<br />
operations include complete instructions. Valve<br />
keepers are not included.<br />
Lift Kits for 1957 thru 1985 Sportster ®<br />
Models<br />
Stock-diameter springs with 20% more pressure.<br />
Includes steel top collars and uses stock lower<br />
collars. Springs 85 lbs. at 1.310", 295 lbs. at<br />
.820", bind at .790".<br />
99217 Stock to .490" lift . . . . . . . . . . . . . . . .$80.99<br />
99294 Set of eight valve keepers . . . . . . . .$16.99<br />
99500 Set of four replacement springs . .$51.99<br />
.465" Lift Kits for Shovelheads<br />
Use with stock or Manley thin-stem valves. Kits<br />
include springs, upper collars and use stock<br />
lower collars. Oversize springs require no<br />
machining. Springs 170 lbs. at 1.450", 315 lbs.<br />
at .985", bind at .880".<br />
99216 Kit with steel collars for stock stem<br />
diameter valves . . . . . . . . . . . . . . . . . .$80.99<br />
99219 Kit with titanium collars for Manley<br />
thin stem valves . . . . . . . . . . . . . . . .$122.99<br />
99295 Set of 8 keepers for CC #99216 . . .$16.99<br />
99294 Set of 8 keepers for CC #99219 . . .$16.99<br />
.650" Lift Kits for Shovelheads<br />
Titanium top collars with steel lower collars and<br />
special interference fit tri-springs. 180 lbs. at<br />
1.600", 365 lbs. at 1.100", 415 lbs. at .950", bind<br />
at .850".<br />
99225 Kit for stock stem diameter valves$140.99<br />
99226 Kit for Manley thin-stem valves .$134.99<br />
99295 Set of 8 keepers for #99225 kit . . .$16.99<br />
99294 Set of 8 keepers for #99226 kit . . .$16.99<br />
41516 5/16" pilot for CC #99226 . . . . . . . .$34.99<br />
.650" Lift Kits for Evolution ®<br />
and Twin Cam 88 ® Models<br />
Kits for Evolution ® and Twin Cam 88 ® engines<br />
from 1984 to present. No machining required,<br />
steel or titanium top collars used with stock<br />
lower collars. Springs 180 lbs. at 1.800", 360 lbs.<br />
at 1.250", 400 lbs. at 1.150", bind at 1.020".<br />
99227 Kit with steel collars . . . . . . . . . . . . .$80.99<br />
99228 Kit with titanium collars . . . . . . . .$122.99<br />
99296 Set of eight keepers . . . . . . . . . . . . .$19.99<br />
Note: CC #55134 kit does not come with lower collars. Use<br />
stock lower collars.<br />
9.38<br />
Prices appearing in this catalog are Suggested Retail Price and are subject to change*