Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tappet Kits<br />
Apparel<br />
Bike Kits<br />
& Trailers<br />
Seats<br />
& Bags<br />
Foot<br />
Controls<br />
Complete Cam Installation Kits<br />
Permits installation of cams without removal of the rocker boxes or gas<br />
tank. Kit includes: RevTech ® adjustable aluminum pushrods, front and rear<br />
tappet block gaskets, early and late Evolution ® cam cover gaskets, cam seal,<br />
inner Torrington cam bearing, pushrod o-rings, air-oil separator to update<br />
the cam cover breather tube and 1/4 ounce of assembly lube. Fits<br />
Evolution ® Big Twin models from 1984 thru 1999.<br />
58588 Cam installation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$174.99<br />
58587 Cam installation kit plus RevTech ® high performance tappets<br />
and chrome tappet blocks (shown) . . . . . . . . . . . . . . . . . . . . . . . . .$319.99<br />
V-Thunder Hydraulic Lifter Kits<br />
Made from premium-quality tool steel and precision-engineered to provide<br />
solid lifter performance with hydraulic lifter convenience. VelvaTouch <br />
design replaces the stock aluminum lifter blocks with ones made of a tough<br />
cast iron alloy. Patented oiling system provides each lifter with its own,<br />
independent oil supply and prevents the lifter from improperly bleeding<br />
down as the stock lifter does. No noise, no vibration, no hassle – just quiet,<br />
precision performance. Lifter blocks have show-quality chrome finish.<br />
Kits for Shovelheads<br />
Includes lifters, lifter blocks, pushrods, and bolts. Fits all Shovelheads<br />
from 1966 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$693.74<br />
30138 Complete kit with stock-length pushrods<br />
V-Thunder Pushrod Kits<br />
Made from .049"-wall 4130 chromemoly steel and precision-machined<br />
to exacting tolerances for the ultimate in reliability and performance.<br />
Convenient adjustment system makes installation easy on just about<br />
any Big Twin <strong>by</strong> eliminating the need to remove the rocker boxes.<br />
Sets of four. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.49<br />
30146 Stock-length pushrod kit for Evolution ® Big Twin models<br />
from 1984 thru 1999 with stock lifter blocks<br />
Hand<br />
Controls<br />
Lighting<br />
Electrical<br />
Exhaust<br />
Intake<br />
<strong>Engine</strong><br />
Gaskets<br />
Tranny<br />
& Clutch<br />
Driveline<br />
JIMS ® ‘Big Axle’ Powerglide <br />
Tappet Block and Lifter Kits for<br />
Evolution ® Big Twin Models<br />
All-new design improves tappet reliability <strong>by</strong><br />
eliminating the inner bearing race. Simplifying<br />
the design of the tappet increases the wall<br />
thickness of the roller <strong>by</strong> 27%, and provides a<br />
36% increase in the size of the tappet axle. The<br />
result is a tappet with twice the strength and<br />
stability of the stock design. Choice of polished<br />
or chrome lifter blocks the same as used <strong>by</strong><br />
JIM’S Pro-Stock racing team. Designed for cams<br />
with a gross valve lift of .550" at the valves and<br />
can be easily clearanced for higher lift cams. Kits<br />
include tappet blocks, Big Axle tappets, gaskets<br />
and chrome screws. Fit Evolution ® Big Twin<br />
models from 1984 thru 1999.<br />
20751 Kit with polished tappet blocks .$584.99<br />
20752 Kit with chrome tappet blocks . .$639.99<br />
JIMS ® Big Axle Powerglide Polished Billet Aluminum Tappet Block Kit<br />
Panhead or Shovelhead engines can now have all the benefits of the hydraulic tappets fitted to Evolution<br />
® engines eliminating the total oil loss of the stock hydraulic units. Made of 7075-T651 aluminum<br />
rated at 83,000 psi, twice as strong 6061-T6 aluminum. Capable of the highest rpm's engines can safely<br />
turn, at a valve lift of .700". Machined to the center line of the cam and held to a tolerance of ±.002".<br />
Bores are held ±.0002" perpendicular to the mounting flange. Includes front and rear tappet blocks, 4<br />
Big Axle Powerglide tappets, tappet block gaskets and instructions.<br />
20839 Fits Panhead and Shovelhead engines from 1953 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$569.99<br />
Tappet Block Screws (sets of 8)<br />
93148 1/4"-24 12 point heads for Big Twins from 1953-early 1976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.49<br />
93149 1/4"-20 countersunk heads for Big Twins from late 1976 thru 1998 . . . . . . . . . . . . . . . . . . . . . . .$7.49<br />
Wheels,<br />
Tires<br />
& Brakes<br />
Frames<br />
Forks<br />
& Shocks<br />
Sheetmetal<br />
General<br />
For the Dealer Nearest You, Call: 800-729-3332<br />
9.69<br />
Cross<br />
Reference