You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tappets & Rollers<br />
<strong>Engine</strong><br />
9<br />
‘HP+ ’ Lifters for Twin Cam 88 ®<br />
Models <strong>by</strong> Feuling<br />
High-flow, standard bore hydraulic roller lifters<br />
provide increased oil flow to the top end.<br />
Fit Twin Cam 88 ® engines from 1999 to present.<br />
• CNC-machined and precision-ground<br />
• Increases critical oil flow to valves, springs,<br />
rockers, shafts and valve guides<br />
• Cooler oil and reduced wear<br />
• Extends life of top end valve gear<br />
• Recommended for use with the Super Pump ’<br />
<strong>by</strong> Feuling<br />
• Drop in replacement for stock lifters<br />
• Dyno developed and track tested<br />
600146 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . .$104.99<br />
600147 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$29.99<br />
20257<br />
20256<br />
Crane ® Hydraulic Roller Tappets<br />
Increase the performance of your valvetrain<br />
with this new tappet design. Made from highstrength<br />
steel alloy that is precision-machined<br />
on CNC equipment and heat-treated for<br />
strength and wear-resistance. Components are<br />
computer-matched and measured to tolerances<br />
of microns for more precise oil metering and<br />
improved oil control, permitting the valvetrain<br />
to reliably perform up to 500 RPM higher than<br />
stock tappets. Sold each.<br />
20256 Fits Evolution ® Big Twin models from<br />
1984 thru 1999 and Sportster ® models<br />
from 1986 thru 1990 . . . . . . . . . . . . .$65.99<br />
20257 Fits Evolution ® Sportster ® and Buell ®<br />
models from 1991 thru 1999 . . . . .$23.74<br />
Premium ® Hydraulic Unit<br />
for Big Twins<br />
A high quality hydraulic unit from the Original<br />
Equipment manufacturer for 1953 thru 1984<br />
Panheads and Shovelheads. . . . . . . . . . . . . . .$71.99<br />
56149 Replaces OEM 17920-53A (sold each)<br />
Replacement Hydraulic Unit<br />
for Big Twins<br />
Low priced alternative. Fits Panheads and<br />
Shovelheads from 1953 thru 1984. . . . . . . .$48.49<br />
56140 Replaces OEM 17920-53A (sold each)<br />
20053<br />
20052<br />
20088<br />
Tappet Adjusting Screws and Nuts<br />
20053 Screws. Fits OHV Big Twin models<br />
(except Evolution ® models) from 1936<br />
thru 1984 (repl. OEM 18555-36)<br />
pack of 4 . . . . . . . . . . . . . . . . . . . . . . . .$9.14<br />
20052 Screws. Fits all Sportster ® models from<br />
1957 thru 1985 (repl. OEM 18554-57)<br />
pack of 4 . . . . . . . . . . . . . . . . . . . . . . . .$9.14<br />
20088 Nuts. Fits all Sportster ® models from<br />
1957 thru 1985 and OHV Big Twins<br />
(except Evolution ® models) from<br />
1938 thru 1984 (repl. OEM 18570-38)<br />
pack of 10 . . . . . . . . . . . . . . . . . . . . . .$9.84<br />
Hydraulic-to-Solid<br />
Lifter Conversion Kit<br />
Converts hydraulic lifters to solids<br />
and still uses the factory pushrods.<br />
A very easy and inexpensive way<br />
to convert to solid lifters.<br />
Set of four. . . . . . . . . . . . . . . . .$19.99<br />
36108 Fits Big Twin models from<br />
1953 thru 1984 (except<br />
Evolution ® models)<br />
Tappet Roller Kits<br />
Fits all OHV Big Twin models (except Evolution ®<br />
models) from 1936 thru 1984, and Sportster ®<br />
and K models from 1952 thru 1985. Each kit<br />
includes axles. Sets of four.<br />
20051 Replaces OEM 18534-29A . . . . . . . .$39.99<br />
24079 Replacement roller axles<br />
(pack of 4) . . . . . . . . . . . . . . . . . . . . . . . .$9.49<br />
Tappet Roller Kit <strong>by</strong> Crane ®<br />
High quality rollers and axles for stock<br />
replacement on all Evolution ® Big Twin models<br />
and 1986 thru 1990 Sportster ® models. Includes<br />
tappet axles and rollers. . . . . . . . . . . . . . . . . .$53.99<br />
24570 Set of four<br />
S&S Hydraulic Lifter<br />
Travel Limiter Kit<br />
Designed to maximize the efficiency of the stock<br />
hydraulic lifters in Evolution ® Big Twin and<br />
Sportster ® engines. This simple yet effective kit<br />
limits the travel of the hydraulic unit in high<br />
RPM situations, there<strong>by</strong>, eliminating potential<br />
engine damage due to high RPM valve float.<br />
Under normal conditions they allow the lifter to<br />
operate as designed, resulting in low valve train<br />
noise and nominal maintenance. In effect, this<br />
provides a solid lifter for racing and hydraulic<br />
lifter for cruising. Sets of 4. . . . . . . . . . . . . . . .$17.99<br />
Note: Requires use of adjustable pushrods.<br />
45843 Fits Big Twin models from 1984-early<br />
1985 (repl. OEM 18500-84)<br />
45718 Fits Evolution ® Big Twin and Sportster ®<br />
models from late 1985 thru 1999<br />
9.66<br />
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Change language