You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tappet Blocks & Accessories<br />
Apparel<br />
Bike Kits<br />
& Trailers<br />
Seats<br />
& Bags<br />
Foot<br />
Controls<br />
S&S Tappet Block Kits<br />
S&S tappet blocks are designed to be stronger,<br />
wear better and last longer than stock. They’re<br />
cast from 356-T6 aluminum alloy and given a<br />
burnished finish to match other S&S engine<br />
components.<br />
Chrome Tappet Block Set<br />
for Evolution ® Big Twin Models<br />
Chrome-plated, aluminum tappet blocks for all<br />
Evolution ® Big Twin models 1984 thru 1999.<br />
Includes eight chrome sockethead screws.$159.99<br />
26173 Replaces OEMs 18540-83A, 18622-85A<br />
(rear) and 18542-83A, 18623-85A (front)<br />
Tappet Blocks for Early Big Twins<br />
These late style tappet blocks fit Big Twin<br />
models from 1953 thru 1984. When fitted to<br />
1953- early 1976 models with stock 1/4"-24<br />
tapered screws, a conversion tappet block screw<br />
set is required. Screws sold separately. Available<br />
with black or chrome finish. Will also fit models<br />
from 1948 thru 1953 without hydraulic lifters.<br />
Sold in pairs. Note: Tappet blocks do not have<br />
vent fitting found on some 1981-1982 models.<br />
020020 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99<br />
Hand<br />
Controls<br />
Lighting<br />
Tappet and Tappet Block Kit<br />
Includes four high-quality tappets, two tappet<br />
blocks, hardware and gaskets.<br />
45726 Fits all Evolution ® Big Twin models<br />
from 1984 thru 1999 . . . . . . . . . . . .$319.99<br />
Tappet Blocks ONLY<br />
Kits includes front and rear tappet blocks,<br />
and hardware and gaskets.<br />
45725 Fits all Evolution ® Big Twin models<br />
from 1984 thru 1999 . . . . . . . . . . . .$121.99<br />
20604<br />
Electrical<br />
Exhaust<br />
Intake<br />
<strong>Engine</strong><br />
20605<br />
Chrome Lifter Blocks for Big Twins<br />
Chrome lifter block set for Panhead and Shovelhead<br />
Big Twins from 1953 thru 1984. Complete<br />
with two sets of chrome-plated sockethead capscrews,<br />
1/4"-20 for models from late 1976 thru<br />
1984 and 1/4"-24 for 1953-early 1976 models.<br />
26170 Complete set of lifter blocks<br />
and screws . . . . . . . . . . . . . . . . . . . . .$129.99<br />
Gaskets<br />
Tranny<br />
& Clutch<br />
Tappet Block Screw Sets<br />
Replace your worn screws with a new chromeplated<br />
set that replaces the originals perfectly.<br />
Packs of 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.49<br />
93148 1/4"-24 12 6-point countersunk heads<br />
for Big Twins from 1953-early 1976<br />
93149 1/4"-20 12-point heads for Big Twins<br />
from late 1976 thru 1999<br />
JIMS ® Billet Tappet Blocks<br />
Polished billet tappet blocks are precisionmachined<br />
from 7075-T651 aluminum. Tappet<br />
bores are held to centerline tolerance of .002"<br />
and are perpendicular to the mounting flange<br />
to within .0002". They will accommodate a cam<br />
with .550" gross lift (.350" at the tappets), and<br />
may be easily modified for higher lift cams.<br />
Sold in pairs.<br />
Driveline<br />
Wheels,<br />
Tires<br />
& Brakes<br />
Dome Lifter Block Bolt Covers<br />
Don't ignore the lifter<br />
blocks when going for<br />
the full custom look.<br />
Set of eight covers install<br />
in seconds with included<br />
silicon adhesive. . . .$14.99<br />
66004 Fits Big Twins<br />
from late 1976<br />
thru 1999<br />
For Evolution ® Big Twin Models<br />
from 1984 thru 1999<br />
Replace OEMs 18540-83A and 18542-83A.<br />
20754 Complete chrome kit (includes<br />
chrome screws and gaskets) . . . .$429.99<br />
20753 Chrome tappet blocks ONLY . . . .$388.09<br />
20604 Polished tappet blocks ONLY . . . .$329.99<br />
For Panheads and Shovelheads<br />
from 1953 thru 1984<br />
Replace OEMs 18602-80A and 18603-80A.<br />
20605 Polished tappet blocks ONLY . . . .$329.99<br />
Note: It is recommended that you use OEM 18522-53 tappets<br />
(or equivalent) with CC #20605.<br />
Tappet Guide<br />
for Sportster ® Models<br />
Aluminum guide for all models 1957 thru 1985.<br />
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99<br />
20009 Replaces OEM 18607-57<br />
Frames<br />
Forks<br />
& Shocks<br />
Sheetmetal<br />
General<br />
For the Dealer Nearest You, Call: 800-729-3332<br />
9.67<br />
Cross<br />
Reference