Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tappet Block Covers<br />
U.S. Des. Pat. #344,274<br />
Tappet Block Covers<br />
for Evolution ®<br />
These die-cast tappet block covers have been redesigned<br />
to completely cover the original block<br />
mounting bolts for a custom look. Installation is<br />
easy with supplied silicone adhesive and does<br />
not require tappet block removal. Fits Evolution ®<br />
Big Twin models from 1984 thru 1999. . . .$55.99<br />
020028 Sold in pairs<br />
<strong>Engine</strong><br />
9<br />
Chrome Tappet Block Cover Sets<br />
for Evolution ® Big Twin Models<br />
These unique covers are available in stamped<br />
steel and die-cast versions that fit over the<br />
Original Equipment tappet blocks like a second<br />
layer of skin, maintaining the stock appearance.<br />
Each cover has a hidden slot in the back permitting<br />
it to be installed without removing your<br />
pushrods. Just lift the pushrod tube covers and<br />
slip them on. They’re held in place with silicone<br />
adhesive which is provided. Four 12-point<br />
chrome screws are included to replace the four<br />
zinc-plated Original Equipment screws which<br />
protrude slightly thru the holes in the fronts<br />
of the covers. Fits all Evolution ® Big Twin models<br />
from 1984 thru 1999<br />
26172 Stamped steel set (shown) . . . . . . .$71.99<br />
26171 Die-cast set . . . . . . . . . . . . . . . . . . . . . .$74.99<br />
Chrome Tappet Block Covers<br />
for Shovelhead Models<br />
Fit over the Original Equipment tappet blocks<br />
like a second layer of skin. Each cover has a hidden<br />
slot in the back which permits it to be<br />
installed without removing your pushrods. Just<br />
lift the pushrod tube covers and slip them on.<br />
They’re held in place with silicone adhesive<br />
which is provided. Early and late-style screws<br />
are included to replace the Original Equipment<br />
screws. Fit all Shovelhead models from 1966<br />
thru 1984.<br />
26178 Stamped steel set . . . . . . . . . . . . . . . .$61.59<br />
Note: Will not fit late 1981-early 1982 models equipped with<br />
the tappet blocks that had oil evacuation fittings.<br />
KüryAkyn Tappet Block Covers<br />
for Sportster ® Models<br />
Quickly and easily improve the look of the lifters<br />
on your engine’s right-hand side with this clever<br />
design from KüryAkyn . . . . . . . . . . . . . . . . .$69.99<br />
48221 Fits all Sportster ® models 1991 thru 1999<br />
Pro-One Billet Lifter Block<br />
Covers for Twin Cam 88 ® Models<br />
CNC-machined from solid billet aluminum,<br />
polished and triple chrome-plated. Includes<br />
chrome hardware. . . . . . . . . . . . . . . . . . . . . . .$199.99<br />
65542 Fits all Twin Cam 88 ® models<br />
from 1999 to present<br />
Chrome Tappet Block Cover Sets<br />
for Evolution ® Sportster ® Models<br />
These covers are available in stamped steel and<br />
die-cast versions that fit over the Original Equipment<br />
tappet blocks like a second layer of skin,<br />
smoothing and improving the stock appearance.<br />
Each cover has a hidden slot in the back which<br />
permits it to be installed in minutes without<br />
removing your pushrods. Just lift the pushrod<br />
tube covers and slip them on. They’re held in<br />
place with the provided silicone adhesive and<br />
fit 4-speed Evolution ® Sportster ® models from<br />
1986 thru 1990.<br />
34172 Stamped steel set (shown) . . . . . . .$39.99<br />
34173 Die-cast set . . . . . . . . . . . . . . . . . . . . . .$74.99<br />
Chrome Tappet Block Covers<br />
for Late Sportster ® Models<br />
Form-fitting chrome-plated stamped-steel tappet<br />
block covers precisely fit the contours of the<br />
late-model tappet blocks. They’re installed with<br />
the stock retaining hardware and fit 5-speed<br />
Sportster ® models from 1991 thru 1994 ONLY.<br />
Set of two covers.<br />
23173 Stamped steel set . . . . . . . . . . . . . . . .$54.99<br />
Tappet Guide Puller<br />
for Sportster ® Models<br />
Removes press-fit tappet guides<br />
from the crankcase after tappet<br />
body adjusting screw is removed.<br />
Fits Sportster ® models from 1957<br />
thru 1978. . . . . . . . . . . . . . . .$31.99<br />
20104 Replaces OEM 95724-57<br />
9.68<br />
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Change language