You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Roller Rocker Arms<br />
<strong>Engine</strong><br />
9<br />
Delkron Billet Rocker Arm Support<br />
A great performance enhancing product for Twin Cam 88 ® motors!<br />
• Made of 6061-T651 aluminum<br />
• Doubles the strength of the die-cast stock part<br />
• Keeps rocker arm shaft location in stock position<br />
• Replaces OEM 17594-99<br />
600119 Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$323.14<br />
RevTech ® Roller Rocker Arms for Evolution ® Models<br />
These rocker arms extend cylinder head service life giving you more miles<br />
between teardowns, reduced friction and more power. The rolling action<br />
virtually eliminates side thrust when opening and closing the valves, minimizing<br />
the wear on your engines valve stems, guides and seals. Concealed<br />
pushrod seats are induction-hardened to 58-60 Rockwell C for scuff resistance<br />
and long-term durability. Computer-designed bodies are extra-thick<br />
and made of 4140 investment cast chromemoly steel that has been normalized<br />
to HRC35 for strength and toughness. Concealed oilways between the<br />
pushrod seats and the rollers provide reliable lubrication. Rollers are precision-machined<br />
from ball race-quality steel before being hardened and<br />
ground with a super-finished bore before being fitted to a heat-treated<br />
roller pin. Shaft bushings are steel backed and bronze laminated for<br />
extreme wear resistance. Set of 4.<br />
59651 Fits all Evolution ® Big Twin and Sportster ® models<br />
from 1984 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$319.99<br />
659649 Replacement bushings (pack of 8) . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.15<br />
Crane Roller Rocker Arms<br />
Made from investment cast 4140 alloy steel, these rocker arms feature<br />
replaceable roller tips that reduce valve stem-tip wear and galling.<br />
Available with traditional bushing or low friction needle bearing fulcrums.<br />
Rocker Arms with Needle Bearing Fulcrum<br />
Offers the strongest cyclical strength available. Cooler running and reduced<br />
valve train friction is obtained <strong>by</strong> using needle bearings at the fulcrum<br />
which is O-ring sealed and pressure fed engine oil for longevity. Kit includes<br />
new shafts, and no machining is required for installation. Sets of 4.<br />
24190 Fits Evolution ® Sportster ® models from 1986 thru 2003, Evolution ®<br />
and Twin Cam 88 ® Big Twin models from 1984 to present, and Buell ®<br />
models from 1988 thru 2002 (1.6:1 ratio) . . . . . . . . . . . . . . . . . . .$515.94<br />
Rocker Arms with Bushing Fulcrum<br />
Crane's exclusive oil metering system lubricates the bushing for long-lasting<br />
performance and reliability. Install on Original Equipment or equivalent<br />
rockershafts. Sets of 4.<br />
24153 Stock (1.6:1 ratio) for all Evolution ® Sportster ® models from 1986<br />
thru 2003, Evolution ® and Twin Cam 88 ® Big Twin models from<br />
1984 to present, and Buell ® models from 1988 thru 2002 . . . .$499.99<br />
22225 1.75:1 ratio for all Evolution ® Sportster ® models from 1986 thru<br />
2003, Evolution ® and Twin Cam 88 ® Big Twin models from 1984 to<br />
present, and Buell ® models from 1988 thru 2002 (permits engine<br />
builder to use a less radical cam with lower lift, yet achieve high<br />
lift at the valve. Modifications to head and rocker boxes may be<br />
required.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99<br />
24142 Fits Shovelhead Big Twins 1966 thru 1984 (1.425:1 ratio) . . . .$499.99<br />
Replacement Parts<br />
24502 Front roller kit (set of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99<br />
24509 Rockershafts for bushing or needle bearing rocker arms<br />
manufactured after late 1995. Fits Evolution ® and Twin Cam 88 ®<br />
models (sold in pairs) See note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99<br />
Note: Needle bearing rocker arms cannot use OEM shafts due to hardness requirements for the<br />
needles. Rocker arms produced before late 1995 use a ‘stepped’ shaft with a smaller center<br />
diameter than the ends. Rocker arms produced after late 1995 are marked with an ‘X’ and use<br />
a ‘straight’ single-diameter shaft.<br />
S&S Roller Rocker Assemblies<br />
Hardened aircraft steel and pressed in bushings give these rocker arms<br />
the highest wear resistance and durability possible. For use in Evolution ®<br />
Big Twins from 1984 thru 1999 with cam lifts to .710" and Evolution ®<br />
Sportster ® models from 1986 thru 2003 with cam lifts to .650". Designed for<br />
use with adjustable pushrods to obtain correct valve lash adjustment. S&S<br />
recommends new rocker arm shafts for maximum performance and mileage.<br />
45690 Set of four rocker arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.99<br />
45691 Replacement set of four rocker shafts . . . . . . . . . . . . . . . . . . . . . . .$27.99<br />
9.42<br />
Prices appearing in this catalog are Suggested Retail Price and are subject to change*