milling of t-slots - Horn USA, Inc.
milling of t-slots - Horn USA, Inc.
milling of t-slots - Horn USA, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MILLING OF T-SLOTS<br />
MILLING SHANK Type<br />
M328<br />
Cutting edge Ø<br />
Ds .945″ (24.0 mm)<br />
Material <strong>of</strong> shank: Carbide - Giving a good vibration resistance<br />
for use with Insert<br />
Type<br />
328<br />
G<br />
Picture = right hand cutting version shown<br />
Part number Ds l 1<br />
l 2<br />
d 1<br />
d<br />
M328.0020.00B 24 104 35 13.5 20<br />
M328.0020.00E 24 104 35 13.5 20<br />
Further sizes upon request<br />
Ordering note:<br />
Milling cutter shanks with damaged seating can be repaired by HORN.<br />
Dimensions in mm<br />
Spare parts<br />
Milling shank Screw Torque TORX PLUS® Wrench<br />
M328.0020.00... 5.13T20KP 53 - 58 lbf-in. T20PQ<br />
G10<br />
In the UNITED STATES call us toll free<br />
1 - 888 - 818 HORN
Change language