Display Function - Marine Autopilots, Engine Controls and Instruments
Display Function - Marine Autopilots, Engine Controls and Instruments
Display Function - Marine Autopilots, Engine Controls and Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12345<br />
12345<br />
12345<br />
12345<br />
12345<br />
12345<br />
NMEA0183 Connection:<br />
NMEA0183 equipment (like the Compass<br />
Sensor) is connected via the NMEA0183 Connection<br />
of a display unit. Attention: use only<br />
the bus distributor next to a display unit!<br />
The NMEA-wires are not present in the bus<br />
cable!<br />
Compass Sensor <strong>and</strong><br />
Sonic Heading Gyro<br />
<strong>Display</strong><br />
<strong>Display</strong><br />
Analog<br />
Sensor<br />
Bus, Power <strong>and</strong><br />
NMEA0183<br />
Compass<br />
Sensor<br />
Analog<br />
Sensor<br />
12345678<br />
RJ-45 plug<br />
3-way RJ-45 Distributor<br />
NMEA0183<br />
Sonic<br />
Heading<br />
Gyro<br />
12345678 12345678<br />
RJ-45 plug<br />
Bus<br />
Bus<br />
NMEA0183<br />
cable:<br />
pin nr. 5..8<br />
CAN Bus<br />
cable:<br />
pin nr. 1..4<br />
The Compass Sensor is connected to the<br />
NMEA0183 input of the display.<br />
Attention: use only the bus distributor<br />
next to that display unit!<br />
The CAN Bus cable (blue markings) does<br />
not carry the NMEA0183 wires (5 to 8).<br />
Therefore it is not possible, to connect<br />
NMEA0183 equipment (like a Compass Sensor<br />
or a GPS) to the CAN Bus. NMEA0183<br />
devices can only be connected to the distributor<br />
that sits directly at a <strong>Display</strong> Unit.<br />
FBW Steering Wheel<br />
Steering Wheel for<br />
fixed installation<br />
Steering Wheel for<br />
mobile installation<br />
Echo Box <strong>and</strong> Sensor<br />
Bus, Power <strong>and</strong><br />
NMEA0183<br />
Alarm Speaker<br />
(only Echo-Box-1)<br />
Echo<br />
Box<br />
<strong>Display</strong><br />
Bus, Power <strong>and</strong><br />
NMEA0183<br />
Sensor input:<br />
(Heading-Gyro<br />
or Thuster<br />
switches)<br />
Remote<br />
FBW unit:<br />
only Bus<br />
<strong>and</strong> Power<br />
Depth<br />
Sensor<br />
Bus<br />
NMEA<br />
0183<br />
Depth Alarm<br />
(Echobox-2)<br />
Bus<br />
The Echo-Box is connected via the NMEA-<br />
0183 Connection of a display unit.<br />
Attention: use only the bus distributor<br />
next to that display unit!<br />
31