User's Manual NX-2430
User's Manual NX-2430
User's Manual NX-2430
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
I<br />
Switches C-3 to C-5: Page Length<br />
Leave these switches ON if you will be using 1l-inch forms. You will<br />
need to change the switches if you will be using a different page length<br />
as shown below:<br />
Page Length c-3 c-4 c-5<br />
11 inches/Letter ON ON ON<br />
8 inches OFF ON ON<br />
11.7 inches/A4 ON OFF ON<br />
12 inches OFF OFF ON<br />
8.5 inches/Letter ON ON OFF<br />
14 inches/Legal OFF ON OFF<br />
10.5 inches/Executive ON OFF OFF<br />
I 7.25 inchesiExecutivel OFF I OFF I OFF I<br />
Switch D-1: Character Table<br />
The action of this switch depends on the mode chosen with switch A-<br />
1.<br />
Move this switch OFF to select Italic character table with the Standard/<br />
Epson emulation mode. If you leave this switch to the ON position, in<br />
place of italics you will get the graphic characters, international characters,<br />
and mathematical symbols of IBM character set #2.<br />
In the IBM emulation mode, ON selects character set #2, which has<br />
international characters and fewer control words.<br />
OFF selects character set #1, for computers with a 7-bit interface.<br />
Switches D-2 to D-4: IBM Code Page or International Character Set<br />
Except in the Standard Italic character set, these switches select the<br />
default character code page as shown below:<br />
IBM Code Page D-2 D-3 D-4 IBMCodePage D-2 D-3 D-4<br />
#437U.S.A. ON ON ON K363Canadian FrenchON ON OFF<br />
#850Multi-lingualOFF ON ON #865Nordic OFF ON OFF<br />
#860Portuguese ON OFF ON (Reserved) ON OFF OFF<br />
#861Icelandic OFF OFF ON (Reserved) OFF OFF OFF
Change language