User's Manual NX-2430
User's Manual NX-2430
User's Manual NX-2430
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PULL TRACTOR UNIT (PT-IOZS)<br />
You can use the Pull Tractor Unit to print on fanfold forms or multi-part<br />
forms through the bottom feed slot.<br />
Setting up<br />
The procedure to mount the Pull Tractor Unit is:<br />
1.<br />
2.<br />
3.<br />
4.<br />
Open the front cover by lifting up the back using the two grips on either<br />
side, then remove it.<br />
Open the rear cover by lifting up the front using the two grips on either<br />
side.<br />
Move the printer bail lever toward the front of the printer to open the<br />
paper bail.<br />
Fit the mounting brackets of the Pull Tractor Unit onto the shaft of the<br />
printer mechanism, tilting the Pull Tractor Unit slightly backward.<br />
Figure 7-12. Fitthe mountingbracketsof the Pull Tractor Unit onto the shaft of the printer,<br />
5. Secure the Pull Tractor Unit firmly by pushing the lock levers on either<br />
side, as shown in Figure 7-13.<br />
71