Archival - CARR McLEAN

Onset ® Hobo ® Data Loggers
HOBO ® H8 Data Logger
Measures Temp/RH/Light
The popular HOBO ® H8 data Logger
provides easy-to-use data collection
at a very affordable price. Advanced
technology and precision components eliminate the need for
calibration. Reliable Logger incorporates a replaceable battery that
lasts a full calendar year. Dimensions: 2-2/5” x 1-9/10” x 4/5”. Wt: 1oz.
(approx).
Features:
• User-selectable sampling intervals: 0.5 seconds to 9 hours
• Recording times up to 1 year
• Programmable start time/date
• Memory modes: Stop when full, Wrap around when full
®
• Read out and relaunch with optional HOBO H9 Shuttle
(sold separately)
• External input accepts external sensors for temperature, AC current,
AC voltage, carbon dioxide (CO 2
), 4-20 mA and 0-2.5 Volts DC
• Blinking LED confirms operation
• Battery level indication at launch
• Nonvolatile EEPROM memory retains data even if battery fails
• Optional NIST temperature certification
• One year battery life typical user-replaceable CR-2032 lithium battery
• Time Accuracy: ±1 minute/week at 20°C (68˚F)
• Operating Environment: 5° to 50°C (41° to 122°F)
• Memory capacity: 7943 measurements (4-Channel External; 32, 520
measurements)
• Requires BoxCar ® Pro Software
Specifications:
Relative Humidity (User-replaceable sensor):
• Range: 25% to 95% RH at 25°C (77°F) for intervals of >10
seconds, non-condensing and non-fogging.
• Accuracy: ±5%
• Response Time: 10 minute typical in air Sensor
Temperature (Internal Sensor):
• Range: -20°C to 70°C (-4° to 158°F)
• Accuracy: ±0.7° at 21°C (±1.27° at 70°F)
• Resolution: 0.4° at 21°C (0.7° at 70°F)
• Response Time in Still Air: 15 mins typical to 90% with
sensor inside case, 1 min typical with sensor outside case
Spectral Response:
• Range: 2 to 600 footcandles (lumens/ft 2 ) typical; maximum
value varies from 300 to 900 foot-candles sensor
• Response Range: Approx. 480 to 600nm Light wavelengt
response
Cat. # Description Price
M10-078 HOBO ® H8 Data Logger .......................................... $310.00
M10-094 Replacement Batteries - 6 per pkg. ...................... 34.00 pkg.
BoxCar ® Pro
Advanced Windows ® Software for HOBO ® Loggers
BoxCar ® Pro 4.3 is a powerful software application for graphing, data
analysis, data export and management of multiple HOBO ® loggers.
BoxCar ® Pro 4.3 System Requirements:
Minimum system requirement is a PC system running Windows
Vista, XP/2000/Me/98. A Pentium 90 or higher with 24MB of RAM
is recommended. The system must have at least one available serial
COM port, a CD-ROM Drive, a 16-bit minimum colour display, and 10
MB of available disk space.
NOTE: BoxCar ® Pro 4.3 Starter Kit is required to operate the LCD
logger. Each Starter Kit includes software, PC interface cable, and
software manual. Use with USB port requires USB-Serial Adapter.
Features
Easy logger setup:
Select from predefined sampling intervals (0.5 seconds to 9 hours) or
program your own custom intervals
Set start time and memory modes
(e.g., stop when full, wrap-around when full)
Verify logger operation before launching
Synchronizes logger and data shuttle clocks to computer clock
Checks battery status
Graphing:
Powerful graphing capabilities allow you to compare multiple
parameters on one graph, including data from multiple loggers or
successive deployments. Then use the zoom and axis-control tools
to focus in on the data of interest. Add a new data series from stored
files or drag-and-drop from one plot on to another.
Cat. # Description Price
M10-077 BoxCar ® Pro Software ................................................ 249.00
110
Order Online! www.carrmclean.ca