ESR-9753 - EnGenius Technologies

More documents

Recommendations

Info

Bandwidth Allocation: This can reserve / limit the throughput of specific protocols and port range. You can set the upper bound and Lower bound. Type: Specify the direction of packets. Upload, download or both. IP range: Specify the IP address range. You could also fill one IP address Protocol: Specify the packet type. The default ALL will put all packets in the QoS priority Queue. Port range: Specify the Port range. You could also fill one Port. Policy: Specify the policy the QoS, Min option will reserve the selected data rate in QoS queue. Max option will limit the selected data rate in QoS queue. Rate: The data rate of QoS queue. 66
Disabled: This could turn off QoS feature. - Routing You can set enable Static Routing to let the router forward packets by your routing policy. Destination LAN IP: Specify the destination LAN IP address of static routing rule. Subnet Mask: Specify the Subnet Mask of static routing rule. Default Gateway: Specify the default gateway of static routing rule. Hops: Specify the Max Hops number of static routing rule. Interface: Specify the Interface of static routing rule. 67
Page 1 and 2:
ESR-9753 Wireless Broadband Router
Page 3 and 4:
Revision History Version Date Notes
Page 5 and 6:
2 Key Features Features Advantages
Page 7 and 8:
4 Product Layout 7
Page 9 and 10:
5 Network + System Requirements To
Page 11 and 12:
8 PC Network Adapter setup (Windows
Page 13 and 14:
9 Bring up ESR-9753 Connect the sup
Page 15 and 16: Setup Wizard Click to proceed. Cli
Page 17 and 18: Check power connection for modem as
Page 19 and 20: Click to enter mode selection. Sel
Page 21 and 22: Enter the name for your wireless ne
Page 23 and 24: 3. Click to navigate into ESR-9753
Page 25 and 26: LAN Settings: This section displays
Page 27 and 28: DHCP Server DHCP Server: This can e
Page 29 and 30: Edit schedule options to allow conf
Page 31 and 32: - Monitor Show histogram for networ
Page 33 and 34: � INTERNET - Status This page sho
Page 35 and 36: Login / Password: Enter the PPPoE u
Page 37 and 38: 2.4 GHz(B): If all your clients are
Page 39 and 40: - Advanced This tab allows you to s
Page 41 and 42: - Security This Access Point provid
Page 43 and 44: Authentication Type: There are two
Page 45 and 46: - MAC Address Filtering This wirele
Page 47 and 48: WPS: Check the box to enable WPS fu
Page 49 and 50: � Firewall Settings The Broadband
Page 51 and 52: - Denial of Service (DoS) The Broad
Page 53 and 54: Add PC MAC Address Fill in “LAN M
Page 55 and 56: - URL Filter You can block access t
Page 57 and 58: � Advanced Settings - Network Add
Page 59 and 60: Add Port Mapping Fill in the "Local
Page 61 and 62: - Port Triggering (Special Applicat
Page 63 and 64: - Application Layer Gateway (ALG) Y
Page 65: Priority Queue This can put the pac
Page 69 and 70: Remote management This allows you t
Page 71 and 72: Synchronize with PC You could synch
Page 73 and 74: - Power Saving power in WLAN mode c
Page 75 and 76: - Back-up This page allows you to s
Page 77 and 78: 13 Repeater Mode Repeater mode has
Page 79 and 80: 802.1d Spanning Tree: This is disab
Page 81 and 82: - Monitor Show the network packets
Page 83 and 84: Site Survey: You can scan the curre
Page 85 and 86: � Tools - Admin You can change th
Page 87 and 88: - Time The Time Zone allows your ro
Page 89 and 90: - Power - Diagnosis Saving power in
Page 91 and 92: - Back-up The page allows you to sa
Page 93 and 94: Appendix A - FCC Interference State
show all

ESR-9753 - EnGenius Technologies

Create successful ePaper yourself

Delete template?

Save as template?