ESR-9753 - EnGenius Technologies

- Back-up
The page allows you to save (Backup) the router’s current configuration
settings. When you save the configuration setting (Backup) you can re-load the
saved configuration into the router through the Restore selection. If extreme
problems occur you can use the Restore to Factory Defaults selection, this will
set all configurations to its original default settings (e.g. when you first purchased
the router).
Backup Settings: This can save the Broadband router current configuration to a
file named "config.bin" on your PC. You can also use the
button to restore the saved configuration to the
Broadband router. Alternatively, you can use the "Restore to
Factory Defaults" to force the Broadband router to perform
a power reset and restore the original factory settings.
91