ESR-9753 - EnGenius Technologies

More documents

Recommendations

Info

- Firmware This page allows you to upgrade the router’s firmware. To upgrade the firmware of your Broadband router, you need to download the firmware file to your local hard disk, and enter that file name and path in the appropriate field on this page. You can also use the Browse button to find the firmware file on your PC. Once you’ve selected the new firmware file, click at the bottom of the screen to start the upgrade process 74
- Back-up This page allows you to save the current router configurations. When you save the configurations, you also can re-load the saved configurations into the router through the Restore Settings. If extreme problems occur you can use the Restore to Factory Defaults to set all configurations to its original default settings. Backup Settings: This can save the Broadband router current configuration to a file named "config.bin" on your PC. You can also use the button to restore the saved configuration to the Broadband router. Alternatively, you can use the "Restore to Factory Defaults" tool to force the Broadband router to perform a power reset and restore the original factory settings. 75
Page 1 and 2:
ESR-9753 Wireless Broadband Router
Page 3 and 4:
Revision History Version Date Notes
Page 5 and 6:
2 Key Features Features Advantages
Page 7 and 8:
4 Product Layout 7
Page 9 and 10:
5 Network + System Requirements To
Page 11 and 12:
8 PC Network Adapter setup (Windows
Page 13 and 14:
9 Bring up ESR-9753 Connect the sup
Page 15 and 16:
Setup Wizard Click to proceed. Cli
Page 17 and 18:
Check power connection for modem as
Page 19 and 20:
Click to enter mode selection. Sel
Page 21 and 22:
Enter the name for your wireless ne
Page 23 and 24: 3. Click to navigate into ESR-9753
Page 25 and 26: LAN Settings: This section displays
Page 27 and 28: DHCP Server DHCP Server: This can e
Page 29 and 30: Edit schedule options to allow conf
Page 31 and 32: - Monitor Show histogram for networ
Page 33 and 34: � INTERNET - Status This page sho
Page 35 and 36: Login / Password: Enter the PPPoE u
Page 37 and 38: 2.4 GHz(B): If all your clients are
Page 39 and 40: - Advanced This tab allows you to s
Page 41 and 42: - Security This Access Point provid
Page 43 and 44: Authentication Type: There are two
Page 45 and 46: - MAC Address Filtering This wirele
Page 47 and 48: WPS: Check the box to enable WPS fu
Page 49 and 50: � Firewall Settings The Broadband
Page 51 and 52: - Denial of Service (DoS) The Broad
Page 53 and 54: Add PC MAC Address Fill in “LAN M
Page 55 and 56: - URL Filter You can block access t
Page 57 and 58: � Advanced Settings - Network Add
Page 59 and 60: Add Port Mapping Fill in the "Local
Page 61 and 62: - Port Triggering (Special Applicat
Page 63 and 64: - Application Layer Gateway (ALG) Y
Page 65 and 66: Priority Queue This can put the pac
Page 67 and 68: Disabled: This could turn off QoS f
Page 69 and 70: Remote management This allows you t
Page 71 and 72: Synchronize with PC You could synch
Page 73: - Power Saving power in WLAN mode c
Page 77 and 78: 13 Repeater Mode Repeater mode has
Page 79 and 80: 802.1d Spanning Tree: This is disab
Page 81 and 82: - Monitor Show the network packets
Page 83 and 84: Site Survey: You can scan the curre
Page 85 and 86: � Tools - Admin You can change th
Page 87 and 88: - Time The Time Zone allows your ro
Page 89 and 90: - Power - Diagnosis Saving power in
Page 91 and 92: - Back-up The page allows you to sa
Page 93 and 94: Appendix A - FCC Interference State
show all

ESR-9753 - EnGenius Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?