CFR 2014/2015
Last years release of the Mountain rack was a huge success. e response from the the low pro-le 3 3/4" height rack weighing in at a featherweight 3.8 pounds was overwhelming. Customers noticed that by dropping the center of mass, and lowering all the weight that is carried in the rack, there snowmobile performed better under load. e Mountain racks design allowing Ski Doo XM factory Holes to be used to install the rack was an added bonus as well. eabuse of rollovers and bumpy access roads were no match for the strong yet lightweight Mountain rack. A unanimous winner!
Last years release of the Mountain rack was a huge success.
e response from the the low pro-le 3 3/4" height rack
weighing in at a featherweight 3.8 pounds was overwhelming.
Customers noticed that by dropping the center of mass, and
lowering all the weight that is carried in the rack, there
snowmobile performed better under load. e Mountain racks
design allowing Ski Doo XM factory Holes to be used to install
the rack was an added bonus as well. eabuse of rollovers and
bumpy access roads were no match for the strong yet
lightweight Mountain rack. A unanimous winner!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Metal Snowboard Rack System (DTM)<br />
Part# M01<br />
The snowboard rack tested and approved by snowboarders Eric Jackson, Bjorn Leines and Mads<br />
Johnson. The Metal snowboard rack System is one of the lightest snowboard brackets on the<br />
market weighing in at 2lbs. Tandem riding with your buddies is now easy as pie with your<br />
snowboards on the rack and not in your back packs hitting you in the back of the head. Having<br />
snowboards fastened to the snowmobile allows you to negotiate tricky snowmobiling situations<br />
getting to your favorite big mountain line or jump spot.<br />
The Metal Snowboard Rack system is made for<br />
the minimalist who wants to be able to carry his<br />
or her snowboard and nothing else. The <strong>CFR</strong><br />
Metal Snowboard Rack System carries one<br />
snowboard on the side of your snowmobile.<br />
(No other rack required)<br />
Another Metal Snowboard Rack System can be<br />
purchased to carry two snowboards. The <strong>CFR</strong><br />
Top mount Billet bracket (Sold separately) can<br />
be purchased if you need to mount the bracket<br />
to the top tunnel of your snowmobile.<br />
Features:<br />
-Used by Professional Snowboarders<br />
Eric Jackson, Bjorn Leines and Mads Johnson<br />
to get there snowboards into the backcountry.<br />
-Metal Snowboard Rack System carries one<br />
snowboard on the side of most snowmobiles<br />
(No other rack required)<br />
-Another snowboard can be carried by<br />
purchasing another Metal Snowboard Rack<br />
Systems.<br />
-A cost effective way of carrying a snowboard on your snowmobile.<br />
-Billet Aluminum top bracket is an optional part.<br />
-Some snowmobile requires bracket to be mounted to the top of the rear tunnel.<br />
-Light weight Nylon parts are infused with resin that makes them extremely strong and can<br />
handle -100 degree cold temps.<br />
-Custom made Injected molded straps that can handle temps as low as -100 cold but will break<br />
in severe roll overs to prevent damage.<br />
-Ratchets and Ladders are custom made<br />
for superior ratcheting lock down.<br />
-All mounting Hardware included is<br />
made from high grade stainless steel.<br />
(Super strong and rust Free)<br />
13<br />
Photo: Mason Mashon
Change language