CFR 2014/2015
Last years release of the Mountain rack was a huge success. e response from the the low pro-le 3 3/4" height rack weighing in at a featherweight 3.8 pounds was overwhelming. Customers noticed that by dropping the center of mass, and lowering all the weight that is carried in the rack, there snowmobile performed better under load. e Mountain racks design allowing Ski Doo XM factory Holes to be used to install the rack was an added bonus as well. eabuse of rollovers and bumpy access roads were no match for the strong yet lightweight Mountain rack. A unanimous winner!
Last years release of the Mountain rack was a huge success.
e response from the the low pro-le 3 3/4" height rack
weighing in at a featherweight 3.8 pounds was overwhelming.
Customers noticed that by dropping the center of mass, and
lowering all the weight that is carried in the rack, there
snowmobile performed better under load. e Mountain racks
design allowing Ski Doo XM factory Holes to be used to install
the rack was an added bonus as well. eabuse of rollovers and
bumpy access roads were no match for the strong yet
lightweight Mountain rack. A unanimous winner!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Knucks Risers<br />
Knucks Handlebar risers are ideal to personally customise<br />
the height of your bars. Machined from Hi Strength super<br />
tough 6061 - T06 Aluminum they can take anything you<br />
can throw at them. An anodized black tumble finish and<br />
Graphics kit will ad some style to your steed. The graphics<br />
are not just for looks with a centering line on the top cap<br />
allowing you to adjust your handle bars to where you want<br />
them! The Knucks come in 4,5,6,7 and 8 inch heights and<br />
will work on your 7/8" or over sized 1 1/8" bars.<br />
Part#<br />
4" CD07<br />
5" CD08<br />
6" CD09<br />
7" CD10<br />
8" CD11<br />
Features:<br />
-CNC machined from Hi strength 6061 - T06 Aluminum<br />
-Graphics are laser etched for a durable long lasting look<br />
-Anodized black and tumbled finished<br />
-Available in 4,5,6,7 and 8" inch heights<br />
-Will work with either 1-1/8" tapered bar or 7/8"bars.<br />
Rider - Rob Alford<br />
(Adaptor included.<br />
-Patent pending ⅞" anti slip insert keeps bars where you want them<br />
-You must have a pivot style steering post or a double pivot adapter<br />
-Designed to be used with the new <strong>CFR</strong> Boondocker/DT Bars but will work with all<br />
handlebars<br />
-Double check length of cables and brake lines for a proper fit. Extended length cables<br />
or brake lines may be required for proper operation<br />
20
Change language