CFR 2014/2015
Last years release of the Mountain rack was a huge success. e response from the the low pro-le 3 3/4" height rack weighing in at a featherweight 3.8 pounds was overwhelming. Customers noticed that by dropping the center of mass, and lowering all the weight that is carried in the rack, there snowmobile performed better under load. e Mountain racks design allowing Ski Doo XM factory Holes to be used to install the rack was an added bonus as well. eabuse of rollovers and bumpy access roads were no match for the strong yet lightweight Mountain rack. A unanimous winner!
Last years release of the Mountain rack was a huge success.
e response from the the low pro-le 3 3/4" height rack
weighing in at a featherweight 3.8 pounds was overwhelming.
Customers noticed that by dropping the center of mass, and
lowering all the weight that is carried in the rack, there
snowmobile performed better under load. e Mountain racks
design allowing Ski Doo XM factory Holes to be used to install
the rack was an added bonus as well. eabuse of rollovers and
bumpy access roads were no match for the strong yet
lightweight Mountain rack. A unanimous winner!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Scraper<br />
Part# 1012<br />
The <strong>CFR</strong> Snow Scraper is a great way to scrape off<br />
unwanted snow and ice from your running boards,<br />
Snowboards or Skis.<br />
In the shop you can scrape off the fresh hot wax from<br />
your Skis or Snowboards.<br />
Tunner Armour<br />
Part# 1014<br />
The <strong>CFR</strong> Tunnel armour use super sticky 3m adhesive to<br />
add a layer of protection to your snowmobile. Stick the<br />
pad on the tunnel to prevent against rubbing from<br />
equipment.<br />
Bar Pad<br />
Part# CD12<br />
The <strong>CFR</strong> bar pads are designed to fit all <strong>CFR</strong><br />
Handlebars or any oversized large diameter Handlebars.<br />
The Dual density foam will protect against sharp<br />
corners and hardware on riser. The Cordura material<br />
with <strong>CFR</strong> logos is long lasting and can withstand cold<br />
temps and all of the abuse that comes with<br />
snowmobiling. The <strong>CFR</strong> Bar pad comes in Black with<br />
white logos.<br />
Super Straps<br />
Part# 1013<br />
The must have strap for your backcountry adventures,<br />
the <strong>CFR</strong> Super Strap and duct tape can pretty much fix<br />
anything.<br />
Snow Scratchers<br />
Part# S01<br />
The <strong>CFR</strong> Snow Scratchers are a cost<br />
effective way to prevent the<br />
overheating of your snowmobiles<br />
Motor on those early morning<br />
long approaches.<br />
Reversible Snow Scratchers<br />
Accessories<br />
Part# S02<br />
These Scratchers are bad ass. They kick up twice as much snow as regular Scratchers and wont<br />
break or bend if you accidentally go in reverse. Hanger<br />
Included to secure scratchers when not in use.<br />
25
Change language