Datasheet - PMCCatalogue

Technical data
Filter housing ( M a t e r i a l s )
• Head: Anodised Aluminium
• Housing: Anodised A l u m i n i u m
• Bypass valve: Nylon
P r e s s u re
• Working pre s s u re: 60 bar (6 MPa)
• Test pre s s u re: 90 bar (9 MPa)
• Burst pre s s u re: 180 bar (18 MPa)
• Pulsed pre s s u re fatigue test: 1.000.000 cycles
with pre s s u re from 0 to 60 bar (6 MPa)
Te m p e r a t u r e
• From -25°C to +110°C
Bypass valve
• Opening pre s s u re 3.5 bar ±10%
• Other opening pre s s u res on re q u e s t .
Δp Elements type
• Series N and W elements: 20 bar
• Oil flow from exterior to interior.
S e a l s
• Standard NBR series A
• Optional FPM
series V
Weights (kg)
L e n g t h
• LMP210 - 1 3.5
• LMP210 -2 4.4
• LMP210 - 3 5 . 4
Volumes (d m 3 )
L e n g t h
• LMP210 - 1 1.5
• LMP210 -2 2
• LMP210 - 3 2.7
Connections
In-line Inlet/Outlet LMP 210
C o m p a t i b i l i t y
• Housings compatible with:
Mineral oils to ISO 2943 - aqueous emulsions
synthetic fluids, water and glycol.
• The filter elements are compatible with:
Mineral oils to ISO 2943, Synthetic fluids
Aqueous emulsions, water and glycol
(series W re q u i re d ).
• NBR seals series A, compatible with:
Mineral oils to ISO 2943 - aqueous emulsions
synthetic fluids, water and glycol.
• V series FPM seals, compatible with:
Synthetic fluids type HS-HFDR-HFDS-HFDU
To ISO 2943
Filter housing Δp pressure drop
The curves are plotted utilising mineral oil
with density of 0.86 kg/dm 3 to ISO 3968.
Δp varies proportionally with density.
0 , 9
0 , 6
0 , 3
0 , 0 0
Valves
5 , 4 0
3 , 6 0
1 , 8 0
0 , 0 0
LMP 210 - Δp Housing
0 60 12 0 18 0 24 0 30 0
Flow rate l/min
Bypass valve pressure drop
Type
A
B
C
LMP 210
A
A
B
C
B / C
0 60 12 0 18 0 24 0 30 0
Flow rate l/min
Filter housing and valves Δp pressure drop connection
Connection
(dimensions page 23)
G1 - G4 - G7- F1 - F4
G2 - G5 - G8 - F2 - F5
G3 - G6 - G9 - F3 - F6
Bypass valve
Recommended maximum flow rate
- Pre s s u re drop of filter assembly equal to Δp 0,6 bar.
- Oil kinematic viscosity 30 mm 2/s ( s C t ).
- Density 0,86 kg/dm 3 .
- Connections of filter under test G 3”.
Filter Flow rate l/min Series N
e l e m e n t Filter lenght
type 1 2 3
2 2
Filter Element Area
Filter element in stainless steel mesh
Length
Type
1 2 3
CU 210 3100 4950 7520
Values expressed in cm 2
A 03 98 140 190
A 06 120 162 200
A 10 175 205 235
A 16 185 225 245
A 25 208 235 250
M 25 265 270 270
P10 245 250 260
P25 250 255 268