Datasheet - PMCCatalogue

Recommended maximum flow rate
- Pre s s u re drop of filter assembly equal to Δp 0.6 bar.
- Oil kinematic viscosity 30 mm 2 /s (cSt).
- Density 0.86 kg/dm 3 .
- Connections of filter under test G 4”.
Manifolds
Position of manifolds IN - OUT connections
0 , 6 0
LMP 902
A03 A06 A10 A16
A 2 5
0 , 4 5
0 , 3 0
M 2 5
FA
0 , 1 5
0 , 0 0
0 50 0 10 00 15 00 20 00 25 00 30 00
Flow rate l/min
FB
0 , 6 0
0 , 4 5
0 , 3 0
LMP 903
A03 A06 A10
A 1 6
A 2 5
M 2 5
0 , 1 5
FC
0 , 0 0
0 50 0 10 00 15 00 20 00 25 00 30 00
Flow rate l/min
Recommended maximum flow rate
The recommended maximum flow rate for filters
installed on lubrication lines, re t u rn or in-line filters is
defined by the oil maximum velocity in the connections.
For filters mounted on Off-Line lines the maximum
recommended flow rate is defined by the pre s s u re dro p
of the filter element.
FD
Filter for pressurised lubrication, max. oil velocity
2.5 m/sec.
Return or in-line filter, max oil velocity 5 m/sec.
Oil velocity
2,5 m/sec.
5 m/sec.
C o n n e c t i o n
4”
1200
2400
Flow rate l/min
O f f-Line filter, the recommended maximum pre s s u re
d rop of exclusively the filter element must be equal
to Δp 0.2 ÷ 0.3 bar.
6 1