Datasheet - PMCCatalogue

Technical data
Filter housing ( M a t e r i a l s )
• Head: Anodised Aluminium
• Housing: Anodised Aluminium
• Bypass valve: Anodised Aluminium
P r e s s u re
• Working pre s s u re: 30 bar (3 MPa)
• Test pre s s u re: 45 bar (4.5 MPa)
• Burst pre s s u re: 120 bar (12 MPa)
• Pulsed pre s s u re fatigue test: 1.000.000 cycles
with pre s s u re from 0 to 30 bar (3 MPa)
Te m p e r a t u r e
• From -25°C to +110°C
• The filter elements are compatible with:
Mineral oils to ISO 2943, Synthetic fluids
Aqueous emulsions, water and glycol ((series W re q u i re d ).
• NBR seals series A, compatible with:
Mineral oils to ISO 2943 - aqueous emulsions
synthetic fluids, water and glycol.
• V series FPM seals, compatible with:
Synthetic fluids type HS-HFDR-HFDS-HFDU
To ISO 2943
Filter Element Area
Filter element in stainless steel mesh
Length
Type
CU 950
2 3
10950 25100
Values expressed in cm 2
Bypass valve
• Opening pre s s u re 3.5 bar ±10%
• Other opening pre s s u res on re q u e s t .
Filter h o u s i n g Δp pressure drop
The curves are plotted utilising mineral oil
with density of 0.86 kg/dm 3 to ISO 3968.
Δp filter elements
Δp varies proportionally with density.
• Series N and W elements: 20 bar
• Oil flow from exterior to interior.
S e a l s
• Standard NBR
• Optional FPM
series A
series V
0 , 6 0
LMP 950 - 951
F1 - 3” - Δp h o u s i n g
9 5 0
F1 - 3”
9 5 1
F1 - 3”
Weights (kg)
L e n g t h
• LMP950 - 2 25.1
• LMP950 - 3 33.5
0 , 4 5
0 , 3 0
0 , 1 5
Volumes (d m 3 )
L e n g t h
• LMP950 - 2 15
• LMP950 - 3 28
0 , 0 0
0 40 0 80 0 12 00 16 00
Flow rate l/min
17 50
C o n n e c t i o n s
In-line Inlet/Outlet LMP 950
90° Inlet/Outlet LMP 951
C o m p a t i b i l i t y
• H o u s i n g s compatible with:
Mineral oils to ISO 2943 - aqueous emulsions
synthetic fluids, water and glycol.
0 , 6 0
0 , 4 5
LMP 950 - 951
F3 - 4” - Δp h o u s i n g
9 5 0
F3 - 4”
9 5 1
F3 - 4”
0 , 3 0
0 , 1 5
6 8
0 , 0 0
0 50 0 10 00 15 00 20 00 25 00
Flow rate l/min