Datasheet - PMCCatalogue

Filter assembly
LMP
LMP 900/901 ordering information
1 2 3 4 5 6 7 8 a
Example: LMP 900 2 B A F1 A10 N P01
Filter Element
CU 900
6 4
7 8b
Example: CU900 A10 A N P01 (2 cartridges required)
1 - Filter sizes
90 0 LMP900 (in-line IN-OUT)
90 1 LMP900 (90° IN-OUT)
2 - Filter length
1 With 1 CU900 cartridge
2 With 2 CU900 cartridges
6 - Filter element
A03 3 µm A16 16 µm
A06 6 µm A25 25 µm
A10 10 µm
M25 25 µm M90 90 µm
M60 60 µm
Absolute filtration
Inorganic
microfibre
ßx (c) ≥ 1 0 0 0
see page 9
Nominal Filtration
Metal mesh
see page 9
3 - Valves
4 - Seals
S Without by-pass
B With by-pass
A NBR
V FPM
5 - Connections
Type
F1 3” SAE 3000 PSI/M
F2 3” SAE 3000 PSI/UNC
F3 4” SAE 3000 PSI/M
F4 4” SAE 3000 PSI/UNC
7 - Filter elements series
N Δp 20 bar
W Δp 20 bar (aqueous emulsions - water and glycol)
8 - Options
a - Filters
P01 MP Standard filters
P02 Maintenance from base of housing (length 2 only)
Pxx Customer reques
b - Filter elements
P01 MP Standard filters
Pxx Customer reques
DIFFERENTIAL INDICATORS (see page 12)
MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and
replacement parts. All rights reserved
The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or
commercial requirements. The colours of the products shown on the cover are purely guideline. Copyright. All rights reserved.
5 7