Datasheet - PMCCatalogue

Valves
Bypass valve pressure drop
LMP 950 - 951
6
Bypass valve
Recommended maximum flow rate
- Pre s s u re drop of filter assembly equal to Δp 0.6 bar.
- Oil kinematic viscosity 30 mm 2 /s (cSt).
- Density 0.86 kg/dm 3 .
F i l t e r Flow rate Filter
e l e m e n t l/min l e n g t h
t y p e Series N
C o n n e c t i o n s
5
4
3
2
1
0 , 00
0 40 0 80 0 12 00 16 00 20 00
Flow rate l/min
A 03 550
A 06 650
A 10 800
A 16 100 0
A 25 120 0
M 25 170 0
A 03 950
A 06 100 0
A10 120 0
A 16 135 0
A 25 140 0
M 25 170 0
2
3
F l a n g e
SAE 3000
3 ”
A 0 3 5 5 0
A 0 6 7 0 0
A 10 850
A 16 110 0
2
A 25 140 0
M 25 230 0
A 03 100 0
A 06 110 0
F l a n g e
SAE 3000
4 ”
A10 140 0
A 16 160 0
3
Option P02 for LMP 950/951
A 25 180 0
M 25 240 0
Option P02 “Internal tube for
reduced flow rate”
recommended for flow rate
values below 100/150 I/min.
The use of option P02 makes
it easier to fill the housing
with the operating fluid.
Recommended maximum flow rate
The recommended maximum flow rate for filters installed
on lubrication lines, re t u rn or in-line filters is defined
by the oil maximum velocity in the connections.
Recommended maximum flow rate for Off-Line filters
is defined by the filter element
p re s s u re drop.
Filter for pressurised lubrication, max. oil velocity 2.5
m/sec.
Return or in-line filter, max oil oil velocity 5 m/sec.
P02 “ I n t e rnal tube for
reduced flow rates”
Oil velocity
2,5 m/sec.
5 m/sec.
C o n n e c t i o n s
3” 4 ”
750
1200
1500
2400
Flow rate l/min.
O f f-Line filter, the recommended maximum pre s s u re
d rop of exclusively the filter element must be equal
to Δp 0.2 ÷ 0.3 bar.
6 9