The HAS-200 system has been devi- sed based on the training ...

<strong>HAS</strong>-206: checking (CHECK2)
• Dimensions: 900x762x865 mm.
• Air treatment unit with pressure regulator and pressure gauge.
• Control keypad: start, stop, reset push buttons. Continuous/single cycle selector and disconnecting switch. Emergency stop push
button
• Three-colour indication light.
• Measuring module:
- Double acting cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Double acting dual twin rod cylinder with speed controllers and initial position switch. Controlled by solenoid valve and fitted with
pressure regulator with pressure gauge.
- Linear potentiometer.
- Auto switches, Reed type.
• Buffer:
- Double acting cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Holding plate: 1 telescopic vacuum pad with vacuum ejector. Controlled by solenoid valve.
- Two double acting cylinders with speed controllers. Controlled by one solenoid valve positioned opposite.
- Auto switches, Reed type.
- PNP output vacuum pressure switch.
• Conveyer belt:
- Conveyer belt pulled by two rollers driven by a 24Vdc motor.
- Double acting dual rod cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Double acting dual rod cylinder with speed controllers and end position switch. Controlled by solenoid valve.
- Two double acting cylinders with speed controllers. Controlled by one solenoid valve positioned opposite.
- Bar code reader BCR.
- Auto switches, Reed type.
- Capacitive detector.
<strong>HAS</strong>-<strong>200</strong>
205