The HAS-200 system has been devi- sed based on the training ...

<strong>HAS</strong>-<strong>200</strong>
<strong>HAS</strong>-209: horizontal storage (stock2)
• Dimensions: 900x762x865 mm
• Air treatment unit with pressure regulator and pressure gauge.
• Control keypad: start, stop, reset push buttons. Continuous/single cycle selector and disconnecting switch. Emergency stop push button.
• Three-colour indication light.
• Warehouse:
- HMI operator terminal.
- Electric linear actuator driven by brushless motor and controlled by positioning driver.
- Electric linear actuator driven by stepper motor and controlled by positioning driver.
- Double acting dual rod cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Pneumatic grippers with two parallel opening jaws, controlled by solenoid valve.
- Auto switches, Reed type.
• Conveyer belt:
- Conveyer belt pulled by two rollers driven by a 24Vdc motor.
- Double acting dual rod cylinder with speed controllers and end position switch. Controlled by solenoid valve.
- Two double acting cylinders with speed controllers. Controlled by one solenoid valve positioned opposite.
- Bar code reader BCR.
- Auto switch, Reed type.
- Capacitive detector.
<strong>HAS</strong>-210: palletising
• Dimensions: 900x762x865 mm.
• Air treatment unit with pressure regulator and pressure gauge.
• Control keypad: start, stop, reset push buttons. Continuous/single cycle selector and disconnecting switch. Emergency push button.
• Three-colour indication light.
208