The HAS-200 system has been devi- sed based on the training ...

<strong>HAS</strong>-208: Vertical storage (STOCK1)
• Dimensions: 900x762x865 mm.
• Air treatment unit with pressure regulator and pressure gauge.
• Control keypad: start, stop, reset push buttons. Continuous/single cycle selector and disconnecting switch. Emergency push
button.
• Three-colour indication light.
• Warehouse:
- HMI operator terminal.
- Two electric linear actuators driven by brushless motors and controlled by positioning drivers.
- Miniature high precision revolving table actuated by blades with speed controllers and 0º and 90º position switches. Controlled
by solenoid valve.
- Double acting cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Holding plate: 2 telescopic vacuum pads with vacuum ejector. Controlled by solenoid valve.
- Auto switches, Reed type.
- PNP output vacuum pressure switch.
• Conveyer belt:
- Conveyer belt pulled by two rollers driven by a 24Vdc motor.
- Double acting dual rod cylinder with speed controllers and end position switch. Controlled by solenoid valve.
- Two double acting cylinders with speed controllers. Controlled by one solenoid valve positioned opposite.
- Bar code reader BCR.
- Auto switch, Reed type.
- Capacitive detector.
<strong>HAS</strong>-<strong>200</strong>
207