The HAS-200 system has been devi- sed based on the training ...

• Container transfer module:
- Double acting dual rod cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Double acting hollow rod cylinder, speed controllers and end position switch. Controlled by solenoid valve.
- Holding plate: 1 telescopic vacuum pad with vacuum ejector. Controlled by solenoid valve.
- Auto switches, Reed type.
- PNP output vacuum pressure switch.
• Platform with rollers module:
- Double acting dual twin rod cylinder with speed controllers and initial and end position switches. Controlled by solenoid valve.
- Three double acting cylinders with speed controllers and end position switches. Controlled by solenoid valve.
- Auto switches, Reed type.
• Conveyer belt:
- Conveyer belt pulled by two rollers driven by a 24Vdc motor.
- Double acting dual rod cylinder with speed controllers and end position switch. Controlled by solenoid valve.
- Two double acting cylinders with speed controllers. Controlled by one solenoid valve positioned opposite.
- Bar code reader BCR.
- Auto switch, Reed type.
- Capacitive detector.
• Breakdown diagnosis <strong>system</strong>:
- System which generates 16 malfunctions by activating various internal switches. Protected with lock.
<strong>HAS</strong>-211: raw material store
• Dimensions: 600x762x865 mm.
• 3 warehouses for raw material
• 4 container feeders
• 1 lid feeder
• CONTROL CABINET
- This includes the general air vent and electric network, general emergency and switch for the Ethernet network (HUB). Optionally,
a laptop can be included where the cell control software can be installed.
• CONTROL SOFTWARE
- EdMES: MES control software for the cell production.
- 3dSupra: SCADA software for the control and supervision of the cell operation.
<strong>HAS</strong>-<strong>200</strong>
209