All Products Guide 11Vol. - Yokogawa

Data Acquisition Equipment
http://tmi.yokogawa.com/products/data-acquisition-equipment/
Real time HDD recording for the long term measuring and the
triggered mode for the high-speed measuring
Oscilloscopes
Maximum sampling rate at real time
recording to the SL1000 Hard Disk
Continuously measured data
can be saved in real time to the
SL1000's internal hard disk.
High-speed and long time
measuring is available.
Number of
Maximum sampling rate
Channels
1 1MS/s
2 500kS/s
4 200kS/s
8 200kS/s
10 100kS/s
16 100kS/s
Maximum measuring time (unit: sec) at Single
triggered measurement
Sampling rate
Number of Measuring Channels
2ch 4ch 8ch 16ch
100MS/s 0.5 0.25 0.1 0.05
50MS/s 1 0.5 0.2 0.1
10MS/s 2.5 1.25 0.5 0.25
1MS/s 25 12.5 5 2.5
500kS/s 100 50 20 10
200kS/s 250 125 50 25
1kS/s 50000 25000 10000 5000
Digital Power
Analyzer
Data Acquisition
Equipment
Optical
Measuring
Instruments
PC monitor display
Real time
full-length
display
Zoom
display
Setting Info.
Or Numeric
values
Operating information
File information,
Record state,
Remaining Hard
Disk indicator, etc.
File Utility
The file utility allows you to process
waveform data files that have been
recorded using the SL1000.
Merging files, Dividing files,
Converting waveform data files
to CSV files
Xviewer Waveform viewer
Offline waveform display and
computation
Generators,
Sources
Next Generation,
Datacomm
Measuring
Instruments
Wireless
Communication
Test Instruments
Recording conditions
Model Number and Suffi x Codes
Other Test &
Measurement
Instruments
• Recording destination
PC HDD, HDD of the SL100 or both
• Start condition
Trigger, Immediate, Specifi ed time, Alarm
• Stop condition
Manually, Specifi ed time, Recording time, Alarm, External trigger
Module Selection
High-speed 100 MS/s 12-Bit Isolation Module
(720210) Specifi cations
Input channels
Input coupling
Maximum sample rate
A/D conversion resolution
Frequency range (-3 dB)
Maximum input voltage (1 kHz or less)
In combination with 700929 or 701947
Direct input (1:1)
DC accuracy
Input impedance
Connector type
Input fi lter
Laser safety standards
701250
701251
701255
701260
701261
701262
701265
701270
701271
701275
701280
2
AC, DC, GND
100 MS/s
12-bit (1,500 LSB/range)
DC-20 MHz
1000 V (DC + ACpeak)
200 V (DC + ACpeak)
± (0.5% of range)
1 MΩ ±1%, approximately 35 pF
Isolated type BNC connector
OFF/2 MHz
class 1 (IEC 60825-1)
* Above plug-in modules can be used among all ScopeCorder series.
Model/Options Suffix Code
720120
Power cable
Others
-D
-F
-R
-Q
-H
/HD1
/C10
/P4
/XV0
/XV1
*1: Plug-in modules and PC not included with the SL1000.
Description
SL1000 High-Speed Data Acquisition Unit *1
Including Xviewer Standard Edition (1 license)(701992-SP01)
UL and CSA standard
VDE standard
AS standard
BS standard
GB standard (Complied with CCC)
Internal 40 GB HDD
Ethernet Interface
Probe power (4-output)
Without Xviewer
With the Xviewer Math Edition (1 license)(701992-GP01)
Model
Description
720210 High-speed 100MS/s 12-Bit Isolation Module (2ch)
701250 High-speed 10MS/s 12-Bit Isolation Module (2ch)
701251 High-speed 1MS/s 16-Bit Isolation Module (2ch)
701255 High-speed 10MS/s 12-Bit non-Isolation Module (2ch)
701260 High-voltage 100kS/s 16-Bit Isolation Module (with RMS, 2ch)
701261 Universal Module (2ch)
701262 Universal Module (with Anti-Aliasing Fileter, 2ch)
701265 Temparature / High-precision voltage Module (2ch)
701275 Acceleration / Volatage Module (with Anti-Aliasing Filter 2ch)
701270 Strain Module (NDIS, 2ch)
701271 Strain Module (DSUB, Shunt-CAL, 2ch)
701280 Frequency Module
Recorders
Control Products
Data Acquisition
Software Suite
Portable Test
Instruments
Meters Products
25