All Products Guide 11Vol. - Yokogawa

Optical Measuring Instruments
http://tmi.yokogawa.com/products/optical-measuring-instruments/
Handy Optical
Powermeter & Light Source
Simplifi ed Functions Bring
Superior Cost Performance
AQ2160-01/AQ2160-02/AQ4270-01
Powerful Tools for Installation of Optical Fiber Networks
with High-performance, Durability and Robustness
Oscilloscopes
Digital Power
Analyzer
AQ2160-01
Optical Powermeter
The AQ2160-01 is a compact, lightweight, cost-effective
optical powermeter designed for optical fi ber line
installation and maintenance. The AQ2160-01 is a new de fac to
stan dard of handheld optical powermeters focusing on the ease of
use, including simple operation, convenient back light ing, and safe
transport using the neck strap.
Optical Power Meter
TB200
AQ2160-02
Optical Powermeter
The AQ2160-02 is a full-featured handheld optical power meter that
can measure the relative and absolute optical power for CW and
chopped light, and is equipped with the data storage capability.
With the USB interface the AQ2160 can transfer the measured data
from an internal memory to a PC.
Multimedia Display Tester
AQ4270-01
LD Light Source (1310/1550 nm)
The AQ4270-01 is a rugged durable handheld LD light source that
is operable in the temperature from 0°C to 50°C and conforms the
waterproofi ng standard IEC60529 IP1.
The AQ4270-01 can output two wavelengths (1310/1550 nm), and
is easy to maintain due to a user cleanable input connector.
3298F
Data Acquisition
Equipment
Optical
Measuring
Instruments
Supports All Blue, Red and Near Infrared Wavelength Bands
TB200
Optical Power Meter
• Suffi cient margin provided by 18 mm dia. sized
photo-receiving surface even at high NA (0.85)
• Infl uence of multiple refl ection alleviated by
low-refl ectivity sensor surface
• High-power measurement up to 100 mW
•Measurement interval of about 100 msec
• Full remote control enabled by standard USB
interface
TB200 Specifi cations
Power Meter Unit
• Display resolution
0.01 dB (When W unit is selected, fl oat ing
point 4 digits past decimal point)
• Unit Display
Absolute value: dBm, mW, µW, nW
Incremental value: dB
•Measurement Interval
Approx. 100 msec
• Interface
USB (type B)
•Power supply
AC adapter (rated input voltage: 100 to 240 V)
7 VA
AA alkali dry cell (operation time: approx. 24
hours)
Power Sensor Unit
•Wavelength range
400 to 850 nm
• Light-receiving element
Si-PD
• Received light power range
1 µW (-30 dBm) to 100 mW (+20 dBm)
•Max. light receiving level
+20 dBm (100 mW)
•Max. power density
5 mW/mm 2
Luminance, Contrast, Flicker and Chromaticity Measurements All with Just one De vice
3298F
Multimedia Display Tester
• Luminance, contrast, fl icker and
chromaticity measurements
• Digital and bar graph indications
• Shading cylinder type optical system
• Luminance measurement range of 0.01 to
40,000 cd/m 2
•Memory for measured data from 200
displays
• GO/NO-GO determination functions
•User-specifi ed color calibration coeffi cients
• Light source color calibration coeffi cients
• Easy operation
• Compact and lightweight
• Battery-driven
3298F Specifi cations
• Luminance measurement range
0.01 to 40,000 cd/m 2
• Luminance measurement range settings
400.0/4,000/40,000 cd/m 2
• Luminance measurement precision
±4% of indicated value + ±0.035% of full-scale value
• Spectral responsivity
Approximates CIE 1931 color matching functions
• Color system
Chromaticity coordinates: (x, y, L) or (u', v', L)
Tristimulus values: (X, Y, Z) or (R, G, B) or (RGB ratio)
Correlated color temperatures: (Tc, duv, L)
• Chromaticity precision
(deviation in x and y values)
±0.002 or less, for type A standard light source
(at 23 ± 3°C, 70% RH or less, and luminance
of at least 2% of the set range's full-scale value)
±0.03 or less, for combination of type A standard
light source/three-wavelength fl u o res cent
lamp + color fi lters (at 23 ± 3°C, 70% RH or
less, and luminance of at least 1% of the set
range's full-scale val ue)
• External dimensions
Sensor dimensions: approx. 67 (W) × 150 × (H)
× 40 (D) mm; tester dimensions: Approx. 107
(W) × 176 (H) × 55 (D) mm
• weight
Approx. 1 kg
•Power supply
Four AA batteries or optional AC adapter
Generators,
Sources
Next Generation,
Datacomm
Measuring
Instruments
Wireless
Communication
Test Instruments
Other Test &
Measurement
Instruments
Light Measurement Data
Management Software
329831
Recorders
Measurement
329831
Light Measurement Data Management Software
This light measurement data management software downloads measurements from a
multimedia display tester (3298/3298F) to a PC and displays data tables,
chromaticity di a grams, deviation charts, and trend graphs. The program can also read
data stored in the display tester's memory.
• The program can be used to display data for each measurement parameter in table format and save
the data to text fi les.
•A graphing function provides easy-to-understand graphical displays of luminance and chro ma tic i ty
measurements according to the particular management application.
• Diagrams such as chromaticity diagrams can be copied and pasted to other Windows
programs using the Windows clipboard.
• Diagrams such as chromaticity diagrams can be printed out as hard copies.
• Setting parameters can be saved to fi les.
•Memory data can be loaded into tables.
For Multimedia Display Tester 3298/3298F
Data transfer
329831 Specifi cations
Functions
• Data table (measurement data)
Displays data for each measurement parameter in table format.
Any of the available parameters can be selected for display.
•Trend graph
Displays trends for luminance, fl icker, and chromaticity.
The number of measurements is shown on the horizontal axis.
• Chromaticity diagram
Displays chromaticity measurements (x, y/u’, v’ table color system) in graph format. The
screen size of the chromaticity diagram can be switched between two different sizes.Three different
plot modes are available: refresh, trace, and scatter.
•Deviation chart
Up to six reference colors can be set for chromaticity measurements.
Reference colors can be input numerically or through measurements.
Three different plot modes are available: refresh, trace, and scatter.
• Surface distribution graph
Displays deviations for luminance and chromaticity according to po si tion
(color ir reg u lar i ty).
• The graphical part of any graph or chart can be copied to the clip board as a bitmap.
• The graphical part of any graph or chart can be printed.
• File saving
Information shown in a data table can be saved in text format.
• Settings
Various coeffi cients can be set (color correction coeffi cient, etc.).
•Memory data
Specifi ed parameters in memory can be displayed in data tables.
System Specifi cations
PC: PC with a Pentium 133 MHz or faster and at least 32 MB RAM, running Win dows98/
NT/2000. The PC should have a serial port conforming to the RS-232 stan dard. Screen:
640 × 480 resolution, 256 or more colors (65,000 or more colors recommended).
Maltimedia displaytester:
3298F (model: 329802) ROM Version 1.00 or later
3298 (model: 329801) ROM Version 1.05 or later
Control Products
Data Acquisition
Software Suite
Portable Test
Instruments
Meters Products
35