Tapit EX Manual ver 4.1.6 - Trisys.com

etween the extension fields. This indicates the range of extensions that has
been selected.
13. 2nd Extension - destination extension.
To include all destination extensions in the report leave both fields empty.
Otherwise, enter a range of extensions or click on the square button to the right
of the 2nd Extension label.
The Enter List for 2nd Extension screen appears. This screen works exactly
the way Enter List for Extension screen does. Refer to pt.12 for instructions.
14. Trunk
To include all trunks in the report leave both fields empty.
Otherwise, enter a range of trunks or click on the square button to the right of
the Trunk label.
The Enter List for Trunk screen appears.
Enter the trunk you want to
add to the right-side list.
Check one of the option buttons, Include or Exclude, located on the top of the
selection screen.
Include – the report is run only for the selected trunks.
Exclude – the selected trunks are excluded from the report.
To add an trunk
Enter the trunk in a text box on the left side of the screen.
Transfer the entry to the right-side list by clicking on the right arrow.
To remove an trunk
Click on the item in the right-side list to highlight it.
Remove it from the list by clicking on the left arrow.
Right-side list contains
selected trunks.
If you want to start over click on the Clear button.
When finished click on OK to accept the selection and go back to the filter
screen. To cancel the selection and go back to the filter screen click on the
Tapit Reports • 37